grab handle removal

sqliberty · **Joined:** Sun Mar 19, 2006 3:08 pm **Posts:** 207

what size is the bolt to remove the grab handle on an 06 I know it was a torx on the 02

Thanks

Gentleman · **Posted:** Sat Mar 10, 2007 9:22 pm

5.5mm

Bob

LiLredLibby · **Posted:** Sat Mar 10, 2007 11:19 pm

Gentleman wrote:

5.5mm

Bob

7/32" will work in a pinch.

chetos · **Posted:** Sun Mar 11, 2007 7:44 am

i bought a 7/32 long socket or whatever it's called. the longer ones...you know... :oops:

LiLredLibby · **Posted:** Sun Mar 11, 2007 9:54 am

chetos wrote:

i bought a 7/32 long socket or whatever it's called. the longer ones...you know... :oops:

Oh yea........Deepwell. :roll:

swyszomirski · **Joined:** Sat Oct 01, 2005 2:59 am **Posts:** 286

I had to grind down the 7/32 I used, so it is now the designated grab handle removal socket.

Stephen

2006 KJ · **Posted:** Sun Mar 11, 2007 5:43 pm

5.5 deep and preferably thin socket..

steve@offroading.net · **Posted:** Sun Jan 10, 2016 8:29 am

Just found this thread searching to find the bolt size, thanks for the info

Didn't have a 5.5mm socket but found in my collection of R\C stuff a combination X spanner with 5.5mm on 1 end, 7mm on the opposite. Chopped off the other 2 arms for clearance and attach it to a 7mm Allen key, hey presto a dedicated grab handle removal tool

steve@offroading.net · **Posted:** Sun Jan 10, 2016 9:02 am

grab handle removal

Who is online