It is currently Fri Aug 23, 2019 6:19 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: fan switch
PostPosted: Wed Jun 12, 2019 1:44 am 
Offline
LOST Member

Joined: Thu Jul 28, 2005 12:29 am
Posts: 369
Does this sound like a fan switch problem? or something else?

The fan/AC/Heater switch stops working on setting #2. 1, 3 and 4 all work fine but the fan turns off at setting 2.

Thanks for any info

Image

_________________
2002 Liberty Limited
2.5" Rusty's Coil Lift + OME 927 springs + 1/4" spacers
265x70 Revos
Warn 4x Floods
ARB bumper
TeraFlex extended front bumpstops
Rock Lizard Skink Super Sliders
Bosch Size 86 battery
Jeepin by Al's 4.5 UC Arms
Kryptonite Differential Cover
JBA Bolt on KJ Tri-Angulated 4 Link


Top
 Profile  
 
 Post subject: Re: fan switch
PostPosted: Wed Jun 12, 2019 11:13 am 
Offline
LOST Addict
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 4828
Location: Central GA
USPLibby wrote:
Does this sound like a fan switch problem? or something else?
The fan/AC/Heater switch stops working on setting #2. 1, 3 and 4 all work fine but the fan turns off at setting 2.
Thanks for any info

Blower Motor Resistor bad. The Resistor controls the voltage going to the blower motor to make it run faster or slower.
Autozone Part Number: JA1476
Mopar PN: 5139719AA
Amazon link:> https://www.amazon.com/Mopar-5139719AA- ... B004E3A7FC :google:

"How to" YouTube video link:> https://www.youtube.com/watch?v=LeVJP9hy5fA

Image

_________________
Proud Supporting Vendor of LOST
05 Jeep Liberty CRD Limited :JEEPIN:

Ironman Springs/Bilstein's
Yeti Stg4 MaxTune
Weeks ElbowKit/BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NOcat
V6Airbox
GM11 bld fan/NAPA HDclutch
IronrockArm/Cust.Mount
DodgeCummins,5"exh. Viair, Huge K&N


Top
 Profile  
 
 Post subject: Re: fan switch
PostPosted: Tue Jun 18, 2019 11:04 pm 
Offline
LOST Member

Joined: Thu Jul 28, 2005 12:29 am
Posts: 369
Thanks, I'll check it out.

_________________
2002 Liberty Limited
2.5" Rusty's Coil Lift + OME 927 springs + 1/4" spacers
265x70 Revos
Warn 4x Floods
ARB bumper
TeraFlex extended front bumpstops
Rock Lizard Skink Super Sliders
Bosch Size 86 battery
Jeepin by Al's 4.5 UC Arms
Kryptonite Differential Cover
JBA Bolt on KJ Tri-Angulated 4 Link


Top
 Profile  
 
 Post subject: Re: fan switch
PostPosted: Wed Jun 19, 2019 5:41 am 
Offline
LOST Member

Joined: Sat Apr 15, 2017 3:48 am
Posts: 265
Location: White River in the Bush South Africa
A lot of Liberty owners use the pre-2005 Sebring resistor pack....exact fit but a much larger cooling area to stop it from burning out.

We never had the Sebring here in SA so if my 2002 Export CRD blows the resistor pack I would probably have to buy from the Dealers or order one from overseas. :?

_________________
2002 Export CRD


Top
 Profile  
 
 Post subject: Re: fan switch
PostPosted: Thu Jun 20, 2019 8:20 pm 
Offline
LOST Member

Joined: Thu Jul 28, 2005 12:29 am
Posts: 369
That was it, I have all fan speeds again.

That lower nut is a PITA to remove and reinstall. I had to dremmel out a notch in a plastic bracket that was blocking access to the nut. It seems like everything on this Jeep is a PITA to service. Always something unrelated blocking full access to the fasteners. :furious:

_________________
2002 Liberty Limited
2.5" Rusty's Coil Lift + OME 927 springs + 1/4" spacers
265x70 Revos
Warn 4x Floods
ARB bumper
TeraFlex extended front bumpstops
Rock Lizard Skink Super Sliders
Bosch Size 86 battery
Jeepin by Al's 4.5 UC Arms
Kryptonite Differential Cover
JBA Bolt on KJ Tri-Angulated 4 Link


Top
 Profile  
 
 Post subject: Re: fan switch
PostPosted: Thu Jun 20, 2019 11:01 pm 
Offline
LOST Addict
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 4828
Location: Central GA
USPLibby wrote:
That was it, I have all fan speeds again.
Great, glad that fixed it!
That lower nut is a PITA to remove and reinstall. I had to dremmel out a notch in a plastic bracket that was blocking access to the nut. It seems like everything on this Jeep is a PITA to service. Always something unrelated blocking full access to the fasteners. :furious
Darn engineers don't design them to be worked on! :

Just think, if you owned a Ford Super Duty Power Stroke, you have to pull the whole cab completely off the frame just to work on the darn engine.
Talk about a real poor design! Very reason why I don't own or drive anything with Ford on it.

_________________
Proud Supporting Vendor of LOST
05 Jeep Liberty CRD Limited :JEEPIN:

Ironman Springs/Bilstein's
Yeti Stg4 MaxTune
Weeks ElbowKit/BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NOcat
V6Airbox
GM11 bld fan/NAPA HDclutch
IronrockArm/Cust.Mount
DodgeCummins,5"exh. Viair, Huge K&N


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com