It is currently Thu Oct 29, 2020 10:23 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 13 posts ] 
Author Message
 Post subject: The new 'what did you do to your Jeep today?' thread
PostPosted: Fri Aug 28, 2020 10:03 am 
Offline
Moderator
Moderator
User avatar

Joined: Sun Jan 29, 2006 5:05 pm
Posts: 678
Apologies to everyone who had been participating in the old 'what did you do to your Jeep today?' thread. During the first and rather massive wave of purging spammers and their posts a couple of months ago, it seems as though the original thread was inadvertently deleted. From checking the logs, this was my fault; most likely, I meant to delete a post in the thread and instead took out the whole thing. I regret that this happened, and while it's not possible to bring back the old thread, a new one can at least be started.

Kicking off: yesterday, at 165,100 miles: replaced the swaybar bushings and end links. The front end is now considerably less klunky and steering feel is improved. Alignment scheduled for tomorrow.

_________________
2005 KJ CRD Limited 4x4:
245/75R16 BFG TA KO2s
OME / Clevis 2.5" Lift
JBA Lifted A-Arms
IRO WJ Short Rear UCA/WWDiesel mount
Skid Row Skidplates
HDS Model 001 Thermostat (190°F)
Suncoast TC
Full Weeks Kit
Bosch 5V glow plugs
Hayden 2986 fan clutch / GM 11-blade fan
Samco / Sasquatch Intake Hoses
Carter in-tank pump
Provent 200
V6 Airbox


Top
 Profile  
 
 Post subject: Re: The new 'what did you do to your Jeep today?' thread
PostPosted: Fri Aug 28, 2020 5:12 pm 
Offline
LOST Addict
User avatar

Joined: Sun Oct 23, 2011 7:32 am
Posts: 3062
Location: Philadelphia, PA
Casm, thanks for all the hard work it took to root out thousands of spam posts. You’ve helped breathe new life into the forum.

I’ll help out, even though it was technically yesterday. I got an oil change and replaced the passengers side hub bearing, which had 171,000 miles on it.

_________________
2008 Liberty Sport 4x4 Automatic
Image
Jeepin By Al 4" Lift Kit
BFG KO2’s 245/75R16
Full MOPAR skid plates
Rock Lizard Skink Super Sliders
AtTheHelm Front Recovery System & Roof Rack

M116A3 Trailer build thread: viewtopic.php?f=72&t=77997


Top
 Profile  
 
 Post subject: Re: The new 'what did you do to your Jeep today?' thread
PostPosted: Fri Aug 28, 2020 9:09 pm 
Offline
LOST Member

Joined: Sat Oct 13, 2018 10:09 pm
Posts: 306
Location: Australia
Sh*t happens casm! Small price to pay for all your hard work. It would have been one hell of a job looking for spam. We may have lost a little useful information but it will reappear in time.
You & WW have got the balance right with regard to what is ok & what is not.
What did I do today? Well actually your today is our yesterday!
I lifted the hood so I could connect my chainsaw sharpener & sharpen the chain. Checked the fluids while the hood was up. All good.
Today (Saturday), having a lazy morning. Probably wont go outside before lunch. Need to put my XJ battery on the charger.

_________________
Australian KJ CRD 2006


Top
 Profile  
 
 Post subject: Re: The new 'what did you do to your Jeep today?' thread
PostPosted: Sat Aug 29, 2020 6:14 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sun Jan 29, 2006 5:05 pm
Posts: 678
Thanks, folks - it is appreciated :D Full credit to WWDiesel as well - having him also dealing with the problem has been invaluable.

Today's stuff (which actually started on Thursday): hit the front wiper arms and plastic end supports on the roof rails with Rustoleum Truck Bed Coating. Preparation consisted of nothing more than removing the pieces, washing them in dish soap (Dawn, for anyone who may be wondering), giving them a good rinse, and then letting them sun-dry before hitting them with the bed liner spray.

No pictures because, frankly, my camera can't show the aftereffects well enough, but I'm pretty happy with how they came out. The Rustoleum bed liner spray has a rather fine grit to it, much less than something like a Line-X or Rhinoliner. It sprays like a slightly thicker paint, which it essentially is, and once dry feels very tactile without being grating.

These were my guinea pigs to see how the spray behaved on both plastic and metal with minimal prep; I've worked with heavy-duty spray-on bedliners before, but never something like this. For the price ($8/can at Home Depot), it's worth it if you're also looking for something to restore fading plastics and paint with as I was. Time will tell how it holds up, but given that I never want to have to redo this on the things it's intended to be used on, I'm optimistic that it will last.

_________________
2005 KJ CRD Limited 4x4:
245/75R16 BFG TA KO2s
OME / Clevis 2.5" Lift
JBA Lifted A-Arms
IRO WJ Short Rear UCA/WWDiesel mount
Skid Row Skidplates
HDS Model 001 Thermostat (190°F)
Suncoast TC
Full Weeks Kit
Bosch 5V glow plugs
Hayden 2986 fan clutch / GM 11-blade fan
Samco / Sasquatch Intake Hoses
Carter in-tank pump
Provent 200
V6 Airbox


Top
 Profile  
 
 Post subject: Re: The new 'what did you do to your Jeep today?' thread
PostPosted: Tue Sep 15, 2020 10:52 pm 
Offline
LOST Newbie

Joined: Mon Jul 08, 2013 10:13 pm
Posts: 6
A 2012 limited jet sneaked into my driveway... afterlooking for many months. Needs a little help, but couldn’t pass it up! needed to get back into the Jeep life after selling my wrangler.


Top
 Profile  
 
 Post subject: Re: The new 'what did you do to your Jeep today?' thread
PostPosted: Sat Sep 19, 2020 5:18 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sun Jan 29, 2006 5:05 pm
Posts: 678
On Tuesday: finally got around to addressing the transmission drainback issue by replacing both transmission filters of unknown (possibly NAPA) origin with Mopar units. Part numbers were 5179267AD (spin-on filter) and 5013470AE (flat filter).

After four mornings of being able to get in, start the engine, and immediately drive off without having to wait 20 to 30 seconds for transmission pressure to build after the KJ was parked overnight, I'm calling it a success. Going to give the TCM a couple of weeks to relearn how to shift when pressures are correct, then order a Sonnax kit.

Yesterday: replaced the electrical connector to the IAP sensor with a Mercedes unit that was considerably cheaper than Chrysler's option. Details here.

Currently sitting here staring at the stack of CV axles and wheel bearings waiting to go in and wondering how many weekends I have left in the year to take care of those jobs before the weather turns cold and wet.

_________________
2005 KJ CRD Limited 4x4:
245/75R16 BFG TA KO2s
OME / Clevis 2.5" Lift
JBA Lifted A-Arms
IRO WJ Short Rear UCA/WWDiesel mount
Skid Row Skidplates
HDS Model 001 Thermostat (190°F)
Suncoast TC
Full Weeks Kit
Bosch 5V glow plugs
Hayden 2986 fan clutch / GM 11-blade fan
Samco / Sasquatch Intake Hoses
Carter in-tank pump
Provent 200
V6 Airbox


Top
 Profile  
 
 Post subject: Re: The new 'what did you do to your Jeep today?' thread
PostPosted: Sat Sep 26, 2020 1:02 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sun Jan 29, 2006 5:05 pm
Posts: 678
Made a trip to the dealer and finally had the speedo corrected for the 245/75R16 tyres. The half-hour of labour that they charged was pretty reasonable in comparison to a speeding ticket.

Per GPS, the speedo now reads a constant 2mph above actual speed. That's close enough to bang-on perfect to make me happy.

_________________
2005 KJ CRD Limited 4x4:
245/75R16 BFG TA KO2s
OME / Clevis 2.5" Lift
JBA Lifted A-Arms
IRO WJ Short Rear UCA/WWDiesel mount
Skid Row Skidplates
HDS Model 001 Thermostat (190°F)
Suncoast TC
Full Weeks Kit
Bosch 5V glow plugs
Hayden 2986 fan clutch / GM 11-blade fan
Samco / Sasquatch Intake Hoses
Carter in-tank pump
Provent 200
V6 Airbox


Top
 Profile  
 
 Post subject: Re: The new 'what did you do to your Jeep today?' thread
PostPosted: Sat Sep 26, 2020 2:09 pm 
Offline
LOST Addict
User avatar

Joined: Sun Oct 23, 2011 7:32 am
Posts: 3062
Location: Philadelphia, PA
casm wrote:
Made a trip to the dealer and finally had the speedo corrected for the 245/75R16 tyres. The half-hour of labour that they charged was pretty reasonable in comparison to a speeding ticket.

Per GPS, the speedo now reads a constant 2mph above actual speed. That's close enough to bang-on perfect to make me happy.

In the KJ is that an electronic adjustment or changing out a physical speedometer gear?

_________________
2008 Liberty Sport 4x4 Automatic
Image
Jeepin By Al 4" Lift Kit
BFG KO2’s 245/75R16
Full MOPAR skid plates
Rock Lizard Skink Super Sliders
AtTheHelm Front Recovery System & Roof Rack

M116A3 Trailer build thread: viewtopic.php?f=72&t=77997


Top
 Profile  
 
 Post subject: Re: The new 'what did you do to your Jeep today?' thread
PostPosted: Sat Sep 26, 2020 3:02 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 5736
Location: Central GA
lfhoward wrote:
casm wrote:
Made a trip to the dealer and finally had the speedo corrected for the 245/75R16 tyres. The half-hour of labour that they charged was pretty reasonable in comparison to a speeding ticket.

Per GPS, the speedo now reads a constant 2mph above actual speed. That's close enough to bang-on perfect to make me happy.

In the KJ is that an electronic adjustment or changing out a physical speedometer gear?

I believe it is done using the factory DRBIII tool that dealers have.
Some high end scanners and programmers like the SnapOn Verus and a few others are also capable of changing tire sizes in the OBC.

I don't think CRD's have any gear driven speed sensors. It is all done with electronic speed sensors. There are two sensors on the transmission and one on top of the real differential on 05 models.
06 models use speed sensors at each wheel.

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/shocks
Yeti StgIV Hot Tune
Sasquatch BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox
GM11 bld. fan/NAPA HDclutch
IronrockArms/wwdieselMount


Top
 Profile  
 
 Post subject: Re: The new 'what did you do to your Jeep today?' thread
PostPosted: Tue Oct 13, 2020 9:55 pm 
Offline
LOST Member

Joined: Thu Dec 01, 2005 10:18 pm
Posts: 123
Location: Suburban St. Louis
Replaced the right rear window regulator.
Was an aftermarket part already.
I think they have all been replaced.


Top
 Profile  
 
 Post subject: Re: The new 'what did you do to your Jeep today?' thread
PostPosted: Tue Oct 13, 2020 10:05 pm 
Offline
LOST Member

Joined: Thu Dec 01, 2005 10:18 pm
Posts: 123
Location: Suburban St. Louis
Recently installed a Scangauge monitor -- primarily to keep a close watch on engine temperature because the radiator fan has a history of not always operating. Heat rising when stalled at a drive-through , etc.

Added a manual switch to start the fan on command. Deciding now the parameters of when to engage it. I think around 215 degrees F.

In the process, I tried to add an "Ambient Air Temperature" reading using their "X-Gauge" programming feature, but it stays blank. The gauge manual says the vehicle simply may not report that. Does anyone know if that is right, or should it work ?


Top
 Profile  
 
 Post subject: Re: The new 'what did you do to your Jeep today?' thread
PostPosted: Wed Oct 14, 2020 5:17 pm 
Offline
LOST Addict
User avatar

Joined: Sun Oct 23, 2011 7:32 am
Posts: 3062
Location: Philadelphia, PA
dkcase wrote:
Recently installed a Scangauge monitor -- primarily to keep a close watch on engine temperature because the radiator fan has a history of not always operating. Heat rising when stalled at a drive-through , etc.

Added a manual switch to start the fan on command. Deciding now the parameters of when to engage it. I think around 215 degrees F.

In the process, I tried to add an "Ambient Air Temperature" reading using their "X-Gauge" programming feature, but it stays blank. The gauge manual says the vehicle simply may not report that. Does anyone know if that is right, or should it work ?


The Scangauge has a built in function for engine temp, which is the degrees F Water Temp in the radiator (°FWT).
Image

The Transmission Fluid Temp (TFT) is an Xgauge command and you can find details here:
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=104&t=84482

Ambient air temperature is the same as the outdoor temperature displayed on your dashboard: it comes from the sensor behind your bumper and in front of the radiator.

_________________
2008 Liberty Sport 4x4 Automatic
Image
Jeepin By Al 4" Lift Kit
BFG KO2’s 245/75R16
Full MOPAR skid plates
Rock Lizard Skink Super Sliders
AtTheHelm Front Recovery System & Roof Rack

M116A3 Trailer build thread: viewtopic.php?f=72&t=77997


Top
 Profile  
 
 Post subject: Re: The new 'what did you do to your Jeep today?' thread
PostPosted: Wed Oct 21, 2020 4:53 pm 
Offline
LOST Member

Joined: Thu Dec 01, 2005 10:18 pm
Posts: 123
Location: Suburban St. Louis
Thanks for replying. I just saw it.

Mine is a 2002. Don't have ambient temp on the dash. The programmed ambient temp reading now gives random, erratic numbers, and is not always blank. For instance, when it started "working" the temp was about 50* and it all of a sudden said 93* and never changed.

Transmission is 45RFE. The Wrangler link talks about codes for the 42RLE, but I see they weren't successful for some who tried them too.

I followed these links and don't think I can get trans temp; would be the next thing I'd like. I actually have a digital trans temp gauge but mounting it and getting through the firewall is not going to happen.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 13 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com