Are there any PTO options for CRD? I might should have the transmission rebuilt/swapped, is there a compatible transmission with a pto port?

I'm trying to think of a reason to keep my 2005 CRD Limited because it only has 104k miles, timing belt kit at 77k miles (because ceramic glow plug failure, I think, displaced the rockers so I replaced them and went to the metal glow plugs, and did timing belt kit for fun).

If I could add a pto to drive a generator and other accessories I might keep it.

Thanks for your advice!

_________________
2005 CRD Inferno Red 22G+Side Airbags+Pwr SR+Seated Heats+Sirius; Stock for Now

The manual 6speed export does not have a place for a PTO.
Probably would be easier to mount something that runs off the front pully.
Radiator may make it hard but still doable.

_________________
Australian KJ CRD 2006

Thanks for the info. I'll look into front pulley applications and keep looking for compatible transmissions or transfer cases with a pto port. I have not yet found any posts about a pto on a Liberty crd, so probably not feasible without major mods.

_________________
2005 CRD Inferno Red 22G+Side Airbags+Pwr SR+Seated Heats+Sirius; Stock for Now