Door Handles

DryBones · **Posted:** Wed Sep 10, 2008 11:31 pm

looks like an easy job with some masking tape. lay the tape out on a counter, mark drill points EVENLY and then stick tape to handle checking positioning before drilling. Looks like another item on the to-do list! now 3 holes or 4? :lol:

rangerd77 · **Joined:** Sat May 03, 2008 10:48 am **Posts:** 512

i would go with 3, 1/2 holes, but thats just me.

DryBones · **Posted:** Thu Sep 11, 2008 1:11 am

I agree on 3 but probably 3/8" not 1/2". way down on my to do list so who knows.

Guest · **Posted:** Thu Sep 11, 2008 1:16 am

I'd cut a 3" hole in the middle of the handle with a hole saw if I were you guys

Inc · **Posted:** Thu Sep 11, 2008 1:23 am

I'm doing 16 , 1/8" holes in mine this weekend. :wink:

JJsTJ · **Posted:** Thu Sep 11, 2008 8:22 am

I found that using a double barrel w/ 00 buck from 15 feet works best and creates a cool random pattern. Just be sure to heavily mask the surrounding sheet metal so you don't get overspray. :twisted:

mrkake · **Posted:** Fri Sep 12, 2008 2:54 pm

JJsKJ wrote:

I found that using a double barrel w/ 00 buck from 15 feet works best and creates a cool random pattern. Just be sure to heavily mask the surrounding sheet metal so you don't get overspray. :twisted:

Overspray

Door Handles

Who is online