I bought some Mopar roof rails not long ago from a fellow Lost member and Im not to sure if they are on right. I have them to where the smallest part of the wedge is facing the front. That means they get bigger as they go back. Should the thick part of the wedge be facing the front? The reason i ask is b/c they make some noise around 70mph and its kinda annoying.

pic:

_________________
LOST KJ'S
Where are you going???
Current Jeep: 2004 Jeep Liberty
-Atlantic Blue
-Air Ride Rear Suspension ; OME/Rustys Lift ; Powertrax Locker ; Moog Lower Ball-Joints ; 245/70/16 Yokohama Geolander A/T-S's on MOABS ; Flowmaster 50 SUV
Lost #007082
http://www.cardomain.com/id/jeepjeepster

I dont know how they mount but you could just mount them the other way and see if its any better.

_________________
Marc
2005 RENEGADE
lift and tires
its a start

The thin edge should be facing forward, and that should reduce you wind noise. If not, you may want to consider adding a fairing.

_________________
2012 Jeep Wrangler Rubicon

Three notes:

1. I have mine on the other way (wide end to front). Mine have a sticker on the underside indicating that is the proper orientation. Also, from a physics perspective, it makes more sense to have the wing facing forward rather than aft.
2. I had an annoying whine from mine for a while...I ascertained it was coming from the front crossbar...I moved it back about 4", and problem solved.
3. FYI: Get a renegade light bar...no more noise at all!

_________________
2005 Jeep Liberty CRD, Provent CCR, 2.5" lift

Thanks Diesel, Ill turn them around and see how it does.

_________________
LOST KJ'S
Where are you going???
Current Jeep: 2004 Jeep Liberty
-Atlantic Blue
-Air Ride Rear Suspension ; OME/Rustys Lift ; Powertrax Locker ; Moog Lower Ball-Joints ; 245/70/16 Yokohama Geolander A/T-S's on MOABS ; Flowmaster 50 SUV
Lost #007082
http://www.cardomain.com/id/jeepjeepster