Hey Jeepin Al, where can I get one of those billet fuel filler doors? My wife want's one.
Thanx
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| fuel filler door http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=10255 |
Page 1 of 1 |
| Author: | Gringo Loco [ Sun Jul 09, 2006 3:47 pm ] |
| Post subject: | fuel filler door |
Hey Jeepin Al, where can I get one of those billet fuel filler doors? My wife want's one.
Thanx |
|
| Author: | 05kjrenny [ Sun Jul 09, 2006 8:54 pm ] |
| Post subject: | |
i believe al told me it was for a tj but you should get one for a dodge ram or something? im sure he will let you know which one is the best fit |
|
| Author: | JFortier777 [ Mon Jul 10, 2006 12:54 am ] |
| Post subject: | |
I WANT ONE TOOO!!!!!!!!!!!!!!!!!!!!!! Throw a link up whoever has the right one. |
|
| Author: | Bohica_KJ [ Mon Jul 10, 2006 7:06 am ] |
| Post subject: | |
I SECOND THAT!!!! I'V BEEN LOOKING FOR THOSE....CANT FIND N E WERE. I WANT ONE!!! |
|
| Author: | Bohica_KJ [ Mon Jul 10, 2006 7:12 am ] |
| Post subject: | |
OH BTW, Whatup Fontier......nice rims 
Got mine today, get em' mouted tomorrow 
|
|
| Author: | auggy [ Mon Jul 10, 2006 9:29 am ] |
| Post subject: | |
Is there a such thing as a plastic fuel door that matches the grey flares from an 05 renegade (or sport) |
|
| Author: | JFortier777 [ Mon Jul 10, 2006 1:05 pm ] |
| Post subject: | |
Bohica_KJ wrote: OH BTW,
Whatup Fontier......nice rims Got mine today, get em' mouted tomorrow LOL "Fortier", but dont worry about it. Take some pictures of them and put em up in the jeepkj forum. Also, HAS ANYONE FOUND THE GAS COVER???!?!?!?11 |
|
| Author: | Jeepin Al [ Mon Jul 10, 2006 2:06 pm ] |
| Post subject: | hey guys and gals |
The door is from a Wrangler. Its a little small, so I recommend using the door from the full size Dodge pick-up. I sell them, but to be honest, it will be cheaper to go to Advanced Auto or Pep-boys and buy there unit. Mine cost me a small fortune and it was one of the first doors produced and the finishing wasn't that great. With all the salts and calcium they spread here in Jersey the thing is very hard to shine up now. Its "billet" funny word, even steel was billet at one time. It's polished Alum! Al Edit: You need to remove the plastic door, and this one you will need to drill holes into the body, so when you do it, you better like it! There may be some out there that "glue" on. |
|
| Author: | Gringo Loco [ Mon Jul 10, 2006 2:17 pm ] |
| Post subject: | |
cool thanx Al. |
|
| Author: | JFortier777 [ Mon Jul 10, 2006 6:28 pm ] |
| Post subject: | Re: hey guys and gals |
Jeepin Al wrote: Edit: You need to remove the plastic door, and this one you will need to drill holes into the body, so when you do it, you better like it! There may be some out there that "glue" on.
*Cringe* |
|
| Author: | Jeepjeepster [ Mon Jul 10, 2006 9:13 pm ] |
| Post subject: | Re: hey guys and gals |
JFortier777 wrote: Jeepin Al wrote: Edit: You need to remove the plastic door, and this one you will need to drill holes into the body, so when you do it, you better like it! There may be some out there that "glue" on. *Cringe* NO WAY! |
|
| Author: | JJsTJ [ Mon Jul 10, 2006 9:46 pm ] |
| Post subject: | |
Got any close up pics outside and of the inside of the door area? My wifes KuJo needs some Bling! 
|
|
| Author: | Cacher123 [ Mon Jul 10, 2006 11:21 pm ] |
| Post subject: | |
I was at Strauss and they have various models, from stick on outer covers to full units. They are not made specifically for liberties so either take your old door with you or have some good measurements. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|