| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Broken clevis anyone???? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=11892 |
Page 1 of 1 |
| Author: | nolakj [ Tue Aug 29, 2006 3:03 pm ] |
| Post subject: | Broken clevis anyone???? |
I think the shop used an impact wrench to put it back together after doing the front half of my lift. The rust holding it together must've gave way.  So the new part is like $70 bucks. Not bad. BUT the bolt that tightens it is a different size than the old bolt (for an 03 anyway). If anyone has to order a new clevis be sure they order this bolt too. It is does not come with the arm.
|
|
| Author: | Jeepjeepster [ Tue Aug 29, 2006 3:27 pm ] |
| Post subject: | |
Hmm, they must of gotten it way to tight. This is a first for me, maybe it was just a bad cast? 
|
|
| Author: | Sport [ Tue Aug 29, 2006 9:56 pm ] |
| Post subject: | |
I used an impact driver when I did my lift and no problems. |
|
| Author: | Bakerkj [ Wed Aug 30, 2006 9:36 am ] |
| Post subject: | |
I had a friend helping me with my lift and he cracked the clevis in half overtightening it. I was able to use the old bolt with the new clevis and I have an 03. Maybe they changed it since last fall. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|