LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Tire size
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=11911		 Page 1 of 1
Author:  David@TNT [ Wed Aug 30, 2006 1:17 pm ]
Post subject:  Tire size
So what is the most common tire size if you dont want excessive rubbing or trimming the pinch weld?
Author:  2006KJSPORT4x4 [ Wed Aug 30, 2006 3:38 pm ]
Post subject: 
Probably a 245/70/16 for no rubbing or pinch weld bashing I believe...
Author:  05JeepKJ [ Wed Aug 30, 2006 7:42 pm ]
Post subject: 
245/75/16 fits with rusty's lift and clears the pinch weld easily but it rubs the front air dam and only during full lock.
Author:  David@TNT [ Fri Sep 01, 2006 11:20 am ]
Post subject: 
05JeepKJ wrote:
245/75/16 fits with rusty's lift and clears the pinch weld easily but it rubs the front air dam and only during full lock.



By the front air dam, you can trim that part correct?
Author:  spoonplugger1 [ Fri Sep 01, 2006 12:16 pm ]
Post subject: 
Trimming the lower lip on the airdam some is what he was talking of I believe. You don't even notice it if done right. Max flexing requires you need to get more agressive front and back.
Author:  David@TNT [ Fri Sep 01, 2006 1:01 pm ]
Post subject: 
spoonplugger1 wrote:
Trimming the lower lip on the airdam some is what he was talking of I believe. You don't even notice it if done right. Max flexing requires you need to get more agressive front and back.


Cool, but what do you mean max flexing requires you need to get more aggressive front and back?
Author:  Tokyojoe [ Fri Sep 01, 2006 6:55 pm ]
Post subject: 
So far, 28 - 4. Looks like a blowout to me. no pun intended..... :twisted:
Author:  Jeepjeepster [ Fri Sep 01, 2006 8:11 pm ]
Post subject: 
Even though I have the 255/70/16 I picked the 245's b/c mine rub. I only have a 1.5in lift, if I had a 2" lift they wouldnt rub at all. :wink:
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/