LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Skid Plate part number for an 02 Sport
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=13943		 Page 1 of 1
Author:  N / A [ Mon Oct 30, 2006 8:45 am ]
Post subject:  Skid Plate part number for an 02 Sport
I called the dealer to get a tranny skid plate and they say they only list the transfer case one and the gas tank one...does anyone have a part number?
Author:  priell3 [ Mon Oct 30, 2006 11:20 am ]
Post subject:  Re: Skid Plate part number for an 02 Sport
N / A wrote:
I called the dealer to get a tranny skid plate and they say they only list the transfer case one and the gas tank one...does anyone have a part number?


Transmission skids are only for '05 and newer models but can be fitted to earlier models with a little tweaking. Jparts.com
has them for a good price.
Author:  N / A [ Tue Oct 31, 2006 3:55 pm ]
Post subject:  Re: Skid Plate part number for an 02 Sport
priell3 wrote:
N / A wrote:
I called the dealer to get a tranny skid plate and they say they only list the transfer case one and the gas tank one...does anyone have a part number?


Transmission skids are only for '05 and newer models but can be fitted to earlier models with a little tweaking. Jparts.com
has them for a good price.



any idea how much tweaking is required?
Author:  spoonplugger1 [ Tue Oct 31, 2006 7:44 pm ]
Post subject: 
You need to change the postion of one hole on the driver's side rear if I remember right, or just do a drill thru and long bolt at the existing hole. Your choice. All the others line up so it's not like you have to hold it in place while you decide what you want to do. Took me 10 minutes tops to install on my 2005 CRD, wouldn't take much longer to install on the others.
Author:  Jeepjeepster [ Tue Oct 31, 2006 8:34 pm ]
Post subject: 
Search around for it. There are a few threads on this.. :wink:
Author:  N / A [ Sun Nov 12, 2006 8:43 am ]
Post subject: 
I just put mine in, was fairly simple, had to drill one hole and pound down one section so the exhaust would clear it, can be done in 30 mins easily.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/