LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

OTIS ignition wire.
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=13966		 Page 1 of 1
Author:  tomcater [ Mon Oct 30, 2006 8:08 pm ]
Post subject:  OTIS ignition wire.
Hi everyone :lol:

I'm a new proud owner of '03 Liberty Rocky Mountain Edition.

I must say I love the truck

I purchased an OTIS for the JEEP and read the install website that is so popular.

I have a couple of questions and I appreciate anyone's help>

I don't want to mess around with the electric wiring so let's see if I got it straight.

I'm to remove the junction box and the BCM and splice 3 wires into the connecting wires that connect to the BCM.

Then I'm to find an ignition hot wire. Of hand, does anyone know of a wire that's there that is hot with ignition only?
I don't have a tester so I don't want to be splicing wires. I tried to read the service manual but it's way too complex to find one wire.

In other words, does anyone know the color and location of the wire I need to splice into?

thanks everyone. I have been reading through all the posts and I have learned a great deal. 8)
Author:  JMLoughrey [ Mon Oct 30, 2006 8:41 pm ]
Post subject: 
you can use the black/orange wire in your vehicles ignition harness.

that would be your 12v accessory wire so it'll only have power when the vehicle is turned on.
Author:  tomcater [ Mon Oct 30, 2006 8:48 pm ]
Post subject: 
That's great. Thanks :lol:

Here's comes another newbie question.

Where is the wire harness located?

Does it come to the junction box :oops:

Sorry about the simple questions but I really don't want to mess up the jeep.

thanks again
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/