how hard is the one peice to install?
The pdf instructions are down.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Front Receiver hitch http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=14154 |
Page 1 of 1 |
| Author: | 1300ZUK [ Sun Nov 05, 2006 1:02 am ] |
| Post subject: | Front Receiver hitch |
what companies make them is it only drawtite? |
|
| Author: | Blue KJ in PA [ Mon Nov 06, 2006 11:20 am ] |
| Post subject: | |
Previously Draw-Tite/Reese made them but I believe they stopped. I think Hidden Hitch still makes a two piece one that will fit. |
|
| Author: | brpn#1 [ Mon Nov 06, 2006 11:57 am ] |
| Post subject: | |
i think they still make it.. one company bought the other.. do a search.. i got a drawtite one.. its one piece.. the hidden hitch is 2 piece.. |
|
| Author: | swyszomirski [ Mon Nov 06, 2006 1:23 pm ] |
| Post subject: | |
I have the two piece and love it! Great for the winch on the carrier and moving trailers easily. I believe mine is a Hidden Hitch |
|
| Author: | dog_party [ Mon Nov 06, 2006 2:12 pm ] |
| Post subject: | |
There's one for sale in the Sale section. http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=13897 |
|
| Author: | Cowcatcher [ Mon Nov 06, 2006 10:10 pm ] |
| Post subject: | |
DrawTite still has them. They just changed the number from the original Reese number. It is the one piece version. In addition to the receiver it also has two recovery loops welded in. |
|
| Author: | 1300ZUK [ Mon Nov 06, 2006 10:48 pm ] |
| Post subject: | |
Cowcatcher wrote: DrawTite still has them. They just changed the number from the original Reese number. It is the one piece version. In addition to the receiver it also has two recovery loops welded in.
thats good to know, i am trying to decide between tow hooks or front reciever, the tow hooks will look better, but the receiver is more user friendly. |
|
| Author: | swyszomirski [ Tue Nov 07, 2006 2:35 am ] |
| Post subject: | |
Get a D-shackle that goes in the front hitch, and that will work just as well as hooks plus it protects the front end with that forged steel sticking out as a bumper. |
|
| Author: | DarbyWalters [ Tue Nov 07, 2006 8:18 am ] |
| Post subject: | |
The hooks are there for safety chains when you tow...not really for recovery...use a shackle tp be safe |
|
| Author: | CMYMUD [ Sat Nov 18, 2006 6:20 pm ] |
| Post subject: | |
Cowcatcher wrote: DrawTite still has them. They just changed the number from the original Reese number. It is the one piece version. In addition to the receiver it also has two recovery loops welded in.
Have'nt seen them on there site ? |
|
| Author: | N / A [ Sun Nov 19, 2006 9:46 am ] |
| Post subject: | |
I have the 2 piece one...was a sensored word to put on |
|
| Author: | Cowcatcher [ Sun Nov 19, 2006 3:14 pm ] |
| Post subject: | |
CMYMUD wrote: Cowcatcher wrote: DrawTite still has them. They just changed the number from the original Reese number. It is the one piece version. In addition to the receiver it also has two recovery loops welded in. Have'nt seen them on there site ? The one piece Drawtite is a model 65042 and is the same as the old Reese model. You need to trim the bumper if you have an '05>. Here is a picture/price: http://www.hitchfinder.com/drawtite/fro ... t_jeep.htm |
|
| Author: | CMYMUD [ Sun Nov 19, 2006 4:57 pm ] |
| Post subject: | |
how hard is the one peice to install?
The pdf instructions are down. |
|
| Author: | waddy whiteguts [ Sun Nov 19, 2006 9:33 pm ] |
| Post subject: | |
You have to remove the bumper cover from the vehicle. The kit should include plastic rivets to reattach it to the fender flares. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|