| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Big fender washer??? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=17010 |
Page 1 of 1 |
| Author: | FreeJeep [ Sat Jan 27, 2007 5:18 pm ] |
| Post subject: | Big fender washer??? |
I have a "fender" washer that I need to find a mate for  Its 2.5" diameter with a 7/16" hole and its gold (like a grade 8 bolt). I think its a left-over from one of my suspension upgrades.
Any ideas where I might find such a thing. Not having any luck locally as of yet. Thanks, DonC |
|
| Author: | callaway [ Sat Jan 27, 2007 5:54 pm ] |
| Post subject: | |
try mcmaster carr www.mcmaster.com |
|
| Author: | Skyjump136 [ Sat Jan 27, 2007 6:32 pm ] |
| Post subject: | |
I was at Ace Hardware the other day and I noticed they had a pretty good selection of fender washers. Not sure if they'd have exactly what you want but worth a look... |
|
| Author: | cowdogg [ Sat Jan 27, 2007 8:31 pm ] |
| Post subject: | |
Skyjump136 wrote: I was at Ace Hardware the other day and I noticed they had a pretty good selection of fender washers. Not sure if they'd have exactly what you want but worth a look...
X2 Nuts and bolts are about the only thing I will shop at ACE for. They do have a good selection but if they don't have one that size or there isn't one near you I'd say go to a local nut and bolt supplier. Here it would be COPPERSTATE NUT and BOLT, but that probably doesn't help you.
|
|
| Author: | FreeJeep [ Sat Jan 27, 2007 9:05 pm ] |
| Post subject: | |
Thnx for the replies. I tried Ace, but they didn't have anything near that size. Looks like McMaster-Carr might be an option, but they don't have the same size, only a bit bigger. Might have to go that route if I can't find a match. DonC |
|
| Author: | G-funk [ Sun Jan 28, 2007 1:56 am ] |
| Post subject: | |
anywhere that sells Hillman Fastener products should have it. Otherwise you can check Fastenal http://www.fastenal.com/web/home.ex |
|
| Author: | Kniggit [ Sun Jan 28, 2007 2:11 am ] |
| Post subject: | |
I was going to say Fastenall but i didn't know if they deal with retail sales to the general public. K |
|
| Author: | spoonplugger1 [ Sun Jan 28, 2007 11:02 am ] |
| Post subject: | |
Sounds like a cadmium plated fender washer. A good hardware store will have them. My little store here in my small town has more of this stuff in it than the big box stores. It's not even close. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|