LOST JEEPS :: View topic - HELP!! Check Engine Light ON!! How to Pull Engine Codes ??

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=1177&highlight=trouble+code+ignition

That was found by search for "trouble code ignition on off" and (*) search for all terms.

If you want trouble codes follow this procedure:

1. Cycle the ignition key On - Off - On - Off - On within 5 seconds.

2. The odometer will show the P-code for the corresponding Diagnostic Trouble Code number.

3. If no DTC's are present, the cluster will display either:

A. "P1684" and "done"
B. Or, only "done"

P1684 does not indicate a problem; it's only a status, which indicates that the PCM memory has been cleared within the last 50 ignition cycles. "Done" indicates that no DTC's are present and the procedure is complete

Author:	Katmandu [ Thu Sep 08, 2005 3:33 pm ]
Post subject:	HELP!! Check Engine Light ON!! How to Pull Engine Codes ??
Wife just called on the way to work.... Her 05 Lib (only 1300 miles on in it) just threw a Check Engine Light. She states it appears to be still running OK. I told her to get to the Dealer ASAP (few miles away) to have the Code pulled and Checked Out. How does one pull a Code at home (if no instrument is available) ?? Is there a key on/off/on/off procedure or something ?? Anyone have a listing of Check Engine Light Codes ?? TIA! ERIC

Author:	dirtykj [ Thu Sep 08, 2005 4:28 pm ]
Post subject:
May the search function be with you. - or - ALL YOUR SEARCHES ARE BELONG TO US

Author:	Katmandu [ Thu Sep 08, 2005 4:51 pm ]
Post subject:
dirtykj wrote: May the search function be with you. - or - ALL YOUR SEARCHES ARE BELONG TO US Yea, I know... I just added a complete list to the Tech Article Forum. http://www.lostjeeps.com/forum/phpBB3/vie ... php?t=1707 But....I did NOT find an answer (yet) on how to pull a Code withOUT a Code Scanner. Is there a way like the Key On/Off/On/Off type procedure available ??

Author:	dirtykj [ Thu Sep 08, 2005 5:12 pm ]
Post subject:
http://www.lostjeeps.com/forum/phpBB3/vie ... e+ignition That was found by search for "trouble code ignition on off" and (*) search for all terms.

Author:	Katmandu [ Thu Sep 08, 2005 6:41 pm ]
Post subject:
dirtykj wrote: http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=1177&highlight=trouble+code+ignition That was found by search for "trouble code ignition on off" and () search for all terms. Another Excellent Topic for our Tech Forum! Quote:* If you want trouble codes follow this procedure: 1. Cycle the ignition key On - Off - On - Off - On within 5 seconds. 2. The odometer will show the P-code for the corresponding Diagnostic Trouble Code number. 3. If no DTC's are present, the cluster will display either: A. "P1684" and "done" B. Or, only "done" P1684 does not indicate a problem; it's only a status, which indicates that the PCM memory has been cleared within the last 50 ignition cycles. "Done" indicates that no DTC's are present and the procedure is complete

LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/

HELP!! Check Engine Light ON!! How to Pull Engine Codes ?? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=1706	Page 1 of 1

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/