LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

pinch welds fixed
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=17990		 Page 1 of 1
Author:  2006 KJ [ Fri Feb 23, 2007 9:32 pm ]
Post subject:  pinch welds fixed
soo.. im sure this has been posted before but i thought i'd do it anyway. after beating down the pinch weld.. and rust proofing everything down there with undercoat.. i cut a large triangle out of the finder well.. heated it and pushed it down flat.. then melted it back together with a hot screw driver... and finally drilled and screwed it to the now flattened pinch weld. looks nice *in my opinon.. and the best rust proofing by keeping it covered (living in PA .. there is a ton of salt in the winter)..

Passangers side
Image

Drivers side
Image
Author:  Jeepjeepster [ Fri Feb 23, 2007 11:48 pm ]
Post subject: 
thats the best looking one Ive seen. Where did you cut the triangle from?

Also, looks like you still have the stock tires. Why did you need to beat it over? :?
Author:  Tokyojoe [ Fri Feb 23, 2007 11:54 pm ]
Post subject: 
Thank you. It is nice to see a mod I made, get improved upon.

:D
Author:  2006 KJ [ Sat Feb 24, 2007 1:54 am ]
Post subject: 
the reason for beating was spidertrax wheel spacers (to make room for 265/75/16's after a frank. lift).. and on the uncut inner fender well there is a box type plastic shell over the pinch weld. I hacked the triangle out from the side of that shell *that covers the pinch weld*
Author:  meh_kick [ Sat Feb 24, 2007 10:04 am ]
Post subject: 
That does look very clean. Nice work.

For those doing this modification...
How many leave the wheels and tires on (just turned out of the way)? How many take them off and prop the jeep up on some stands?

I've heard arguments for both, but I don't know about having the vehicle up on stands pounding it with a sledge.
Author:  Jeepjeepster [ Sat Feb 24, 2007 10:51 am ]
Post subject: 
meh_kick wrote:
That does look very clean. Nice work.

For those doing this modification...
How many leave the wheels and tires on (just turned out of the way)? How many take them off and prop the jeep up on some stands?

I've heard arguments for both, but I don't know about having the vehicle up on stands pounding it with a sledge.


If you still had 3 wheels on the ground, and only that side on the jack stand then it should be ok. :)
Author:  Science_Guy [ Sat Feb 24, 2007 11:03 am ]
Post subject: 
Tokyojoe wrote:
Thank you. It is nice to see a design I made, get improved upon.

:D


Is there details on this procedure somewhere? I can not seem to find it with the search tools.
Author:  Tokyojoe [ Sat Feb 24, 2007 12:04 pm ]
Post subject: 
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=7690

In the Fabrication section.

I do like the screw idea.

Overall, you can not really see the area very well unless the wheel is turned all the way in on that wheel well.

There isn't a problem hammering the pinch weld while one wheel is on a jack stand AND you keep the floor jack there also. Set your E-brake, place some wheel chocks and you are good to go.
Author:  2006 KJ [ Sat Feb 24, 2007 1:29 pm ]
Post subject: 
wow.. that is a good post in the fab. section. I didnt see that before i did mine... the only thing i did different was took the fender liner out. I also only cut one side.. hahaha i noticed you specified HEAVY leather gloves.. that is very true. I used some leather ones at first (pushing down the heated plastic) and it got pretty warm. So i just used welding gloves and they worked great! Just a warning... when your heating the plastic and it starts to get real shinny.. STOP! that's right before the melting point.. and the perfect time to mold it to how you want... then cool it with a damp rag and hold pressure on it for a min.. and it should work perfect!
Author:  dieselenthusiast [ Fri Mar 22, 2013 7:46 pm ]
Post subject:  Re: pinch welds fixed
Bump for those who may benefit from this thread.
Author:  user113 [ Fri Mar 22, 2013 11:07 pm ]
Post subject:  Re: pinch welds fixed
I put mine up on jack stands when I did them, not enough room to get a really good swing with the wheels just turned.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/