Here's a couple views of the hood.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Ram Air Hood http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=18305 |
Page 1 of 1 |
| Author: | meh_kick [ Tue Mar 06, 2007 7:55 am ] |
| Post subject: | Ram Air Hood |
I received an email from Terry at Profinish-Proglass regarding the ram air hood seen here http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=18219. Quote: Thank you, we can build as many as you guys might want. Price is 549.00
+ shipping to? Comes in a gray or black sandable gelcoat finish ready to sand and paint. Currently only have abiility to build about one a week Thanks Terry Didn't know if anyone was interested, thought I'd share. Website: http://www.profinish-proglass.com/ Email: terry@profinish-proglass.com |
|
| Author: | Fulltimer [ Tue Mar 06, 2007 6:46 pm ] |
| Post subject: | |
That IS a great looking hood! I'll put it on my wish list. Thanks for the post! Terry |
|
| Author: | unixxx [ Tue Mar 06, 2007 6:53 pm ] |
| Post subject: | |
I wonder if they can make one in a Renegade version? |
|
| Author: | KY Liberty [ Tue Mar 06, 2007 7:43 pm ] |
| Post subject: | |
Here's a couple views of the hood.
|
|
| Author: | Gris [ Tue Mar 06, 2007 8:08 pm ] |
| Post subject: | |
KY< Have you ever posted any shots under the hood? Do you actually utilize the ram effect? |
|
| Author: | RespectMyLibertay [ Tue Mar 06, 2007 8:13 pm ] |
| Post subject: | |
Is that price for the whole hood, I'm hoping...? |
|
| Author: | KY Liberty [ Tue Mar 06, 2007 8:32 pm ] |
| Post subject: | |
I've actually never posted a picture of the underside of the hood. On Terry's, there is an opening in the bottom of the hood, right above the snorkel from the stock air intake. The top curve of the snorkel has been removed. On mine, the opening has been enlarged to about 4" X 5" which puts it directly above the K&N FIPK. The support bar for the K&N has been bent to move the filter up closer to the opening in the hood. I worked with the heat shield, and adjusted the height of the hood to get a pretty good seal between the heat shield and hood. It really makes a big difference. |
|
| Author: | KY Liberty [ Tue Mar 06, 2007 8:34 pm ] |
| Post subject: | |
RespectMyLibertay wrote: Is that price for the whole hood, I'm hoping...?
The hood is made in 2 pieces, but it is one piece when you get it. It bolts on using the existing hardware. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|