i bought a 7/32 long socket or whatever it's called. the longer ones...you know...
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| grab handle removal http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=18438 |
Page 1 of 1 |
| Author: | sqliberty [ Sat Mar 10, 2007 8:48 pm ] |
| Post subject: | grab handle removal |
what size is the bolt to remove the grab handle on an 06 I know it was a torx on the 02 Thanks |
|
| Author: | Gentleman [ Sat Mar 10, 2007 9:22 pm ] |
| Post subject: | |
5.5mm Bob |
|
| Author: | LiLredLibby [ Sat Mar 10, 2007 11:19 pm ] |
| Post subject: | |
Gentleman wrote: 5.5mm
Bob 7/32" will work in a pinch. |
|
| Author: | chetos [ Sun Mar 11, 2007 7:44 am ] |
| Post subject: | |
i bought a 7/32 long socket or whatever it's called. the longer ones...you know...
|
|
| Author: | LiLredLibby [ Sun Mar 11, 2007 9:54 am ] |
| Post subject: | |
chetos wrote: i bought a 7/32 long socket or whatever it's called. the longer ones...you know...
Oh yea........Deepwell. 
|
|
| Author: | swyszomirski [ Sun Mar 11, 2007 12:26 pm ] |
| Post subject: | |
I had to grind down the 7/32 I used, so it is now the designated grab handle removal socket. Stephen |
|
| Author: | 2006 KJ [ Sun Mar 11, 2007 5:43 pm ] |
| Post subject: | |
5.5 deep and preferably thin socket.. |
|
| Author: | steve@offroading.net [ Sun Jan 10, 2016 8:29 am ] |
| Post subject: | Re: grab handle removal |
Just found this thread searching to find the bolt size, thanks for the info  Didn't have a 5.5mm socket but found in my collection of R\C stuff a combination X spanner with 5.5mm on 1 end, 7mm on the opposite. Chopped off the other 2 arms for clearance and attach it to a 7mm Allen key, hey presto a dedicated grab handle removal tool 
|
|
| Author: | steve@offroading.net [ Sun Jan 10, 2016 9:02 am ] |
| Post subject: | Re: grab handle removal |
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|