| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Ball joints from NAPA Auto--Spicer http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=18538 |
Page 1 of 1 |
| Author: | Blue KJ in PA [ Wed Mar 14, 2007 5:47 am ] |
| Post subject: | Ball joints from NAPA Auto--Spicer |
Anyone ever use the ball your replacement sold at NAPA? I called them up yesterday to see if they had the MOOGs and the guy said no but they have Spicer ones that have a more rugged design than the OEMs. I asked if they had the zerk for grease and he said "I doubt it as they have a new special polymer blah blah blah but I'll check one for ya." He opened the box and said "Wow, they do." Price is $72 online I think he told me $77. http://www.napaonline.com/MasterPages/N ... Suspension |
|
| Author: | boxhead [ Wed Mar 14, 2007 10:46 am ] |
| Post subject: | Re: Ball joints from NAPA Auto--Spicer |
Blue KJ in PA wrote: Anyone ever use the ball your replacement sold at NAPA? I called them up yesterday to see if they had the MOOGs and the guy said no but they have Spicer ones that have a more rugged design than the OEMs. I asked if they had the zerk for grease and he said "I doubt it as they have a new special polymer blah blah blah but I'll check one for ya." He opened the box and said "Wow, they do." Price is $72 online I think he told me $77.
http://www.napaonline.com/MasterPages/N ... Suspension I think spicer is now owned by Dana. They make a lot of parts, in particular I've seen them on 4x4's. THey should be good LBJ's and a good alternative for us. |
|
| Author: | tjkj2002 [ Wed Mar 14, 2007 12:26 pm ] |
| Post subject: | Re: Ball joints from NAPA Auto--Spicer |
Blue KJ in PA wrote: Anyone ever use the ball your replacement sold at NAPA? I called them up yesterday to see if they had the MOOGs and the guy said no but they have Spicer ones that have a more rugged design than the OEMs. I asked if they had the zerk for grease and he said "I doubt it as they have a new special polymer blah blah blah but I'll check one for ya." He opened the box and said "Wow, they do." Price is $72 online I think he told me $77. Well if that pic is correct they don't look any different that the OEM's(they may have used a genaric pic,but dang they look identical to the OEM's),and where is the grease zerk? Happen to have(or could get) a pic of the one one he showed you? I put in K3199 in the non-napa pt# and the same part came up.Got my MOOG K3199's from CarQuest for $60 apiece.
http://www.napaonline.com/MasterPages/N ... Suspension |
|
| Author: | Blue KJ in PA [ Wed Mar 14, 2007 12:48 pm ] |
| Post subject: | |
Yeah, the pic is why I called. He walked back into the rack, I could hear him walking and shuffling through the rack, and then opened one and he definitely sounded surprised when he opened the box and saw the zerk. I am planning to stop by there and check them out for myself. I don't have a Carquest nearby, do they sell off the internet and ship? |
|
| Author: | Troysterr [ Wed Mar 14, 2007 11:01 pm ] |
| Post subject: | |
Rockauto.com has a good price for the Moogs. |
|
| Author: | SavageUrge [ Thu Mar 15, 2007 1:50 am ] |
| Post subject: | Check out the price for Moogs! |
http://www.rockauto.com/catalog/x,carco ... type,10070 |
|
| Author: | PBrug [ Thu Mar 15, 2007 9:17 am ] |
| Post subject: | Re: Check out the price for Moogs! |
SavageUrge wrote: http://www.rockauto.com/catalog/x,carcode,1420805,parttype,10070
For $46.79 and by the picture they show, it doesn't look like those Moogs have the grease fitting. Plus, if DC is going to reimburse you for the Moogs (plus what ever mark-up you can do) it won't matter much what you pay for them. |
|
| Author: | Blue KJ in PA [ Thu Mar 15, 2007 10:36 am ] |
| Post subject: | |
The Spicer does have a zerk according to the one the NAPA guy pulled off the shelf. The only thing I have yet to verify is whether it has the same taper that the MOOG has. The Problem Solver by MOOG has a different taper then the OEMs which is what makes them better. The "mark-up" you add has to be on the paper proof (recipts) that you provide DC. |
|
| Author: | Maximum Carnage [ Fri Mar 30, 2007 12:59 pm ] |
| Post subject: | |
Do these MOOGs fit the OEM UCA or LCA? |
|
| Author: | KJ04 [ Fri Mar 30, 2007 5:48 pm ] |
| Post subject: | |
Lower only, the top B.J. is one piece with the upper control arm. |
|
| Author: | spoonplugger1 [ Sat Mar 31, 2007 12:39 pm ] |
| Post subject: | |
Al's uppers give you a greasable and replaceable upper MOOG ball joint. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|