| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| receiver shackle lock... http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=20221 |
Page 1 of 1 |
| Author: | riptricket [ Sun Apr 29, 2007 12:14 am ] |
| Post subject: | receiver shackle lock... |
does anyone know if a lock can be put in the warn receiver where the d-shackle goes in the other end? |
|
| Author: | callaway [ Sun Apr 29, 2007 12:23 am ] |
| Post subject: | Re: receiver shackle lock... |
riptricket wrote: does anyone know if a lock can be put in the warn receiver where the d-shackle goes in the other end?
the receiver can be locked into the hitch with a standard hitch lock via the hitch pin hole ... was that the question? |
|
| Author: | riptricket [ Sun Apr 29, 2007 12:31 am ] |
| Post subject: | |
i know that, and i have mine locked in there, but i have the shackle in the back of my jeep b/c i don't want anyone to steal it. the question is can i lock the hole where the shackle would go in? |
|
| Author: | Sir Sam [ Sun Apr 29, 2007 3:44 am ] |
| Post subject: | |
riptricket wrote: i know that, and i have mine locked in there, but i have the shackle in the back of my jeep b/c i don't want anyone to steal it. the question is can i lock the hole where the shackle would go in?
Just put the locking pin in the empty hole? |
|
| Author: | 05kjrenny [ Sun Apr 29, 2007 8:50 am ] |
| Post subject: | |
Tighten it really tight and nobody will steal it. |
|
| Author: | riptricket [ Sun Apr 29, 2007 10:58 am ] |
| Post subject: | |
but there is not a lock specifically made to go where the shackle goes? |
|
| Author: | Jeepjeepster [ Sun Apr 29, 2007 1:32 pm ] |
| Post subject: | |
riptricket wrote: but there is not a lock specifically made to go where the shackle goes?
There could be, but Ive never seen one. If you get it really tight like 05kjrenny said, they wouldnt be able to steel it without a pair of channel locks.. |
|
| Author: | swyszomirski [ Mon Apr 30, 2007 1:11 am ] |
| Post subject: | |
Get one of those really really BIG philips screw drivers, that are like 20" long, rotate the shackle against the hitch, put the point of the screw driver in the shackle bolt hole and tight the crap out of it. I did that well over a year ago and it is still there, in the frint hitch, even after going through a Passat rear bumper 
Stephen |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|