LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Recommend a spray on bed liner...
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=20694		 Page 1 of 1
Author:  BlueFreedom [ Mon May 14, 2007 12:56 pm ]
Post subject:  Recommend a spray on bed liner...
My Rock Rails are starting to rust. Can anyone recommend a spray on bed liner (preferably a dark grey or black color) that I can use myself? :?:

Thanks in advance!!

- Brian
Author:  GilaMonster [ Mon May 14, 2007 1:54 pm ]
Post subject:  Re: Recommend a spray on bed liner...
BlueFreedom wrote:
My Rock Rails are starting to rust. Can anyone recommend a spray on bed liner (preferably a dark grey or black color) that I can use myself? :?:

Thanks in advance!!

- Brian


I've used Herculiner with good results.

ETA: Sorry, I've only used it as roll-on application. But, that should work for rock rails.
Author:  kolesy [ Mon May 14, 2007 2:15 pm ]
Post subject: 
Go to auto zone and buy some cans of the spray on undercoating. I used this to cover up the pounded down pinch weld cover and some other things. it is cheap and works awesome!
Author:  sqliberty [ Mon May 14, 2007 2:59 pm ]
Post subject: 
I had Line-X do mine, but Hurculiner looks like it would be good for DIY. the spray can stuff is good for some stuff,(pinche weld, hitch, Etc. but a bit thin for rockrails IMO
Author:  jdumont [ Mon May 14, 2007 3:29 pm ]
Post subject: 
I did the Herculiner stuff on my fenders and doors...

http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=20485
Author:  dirtykj [ Mon May 14, 2007 3:53 pm ]
Post subject: 
sqliberty wrote:
but a bit thin for rockrails IMO


Cheap and easy touch up ... I use it on my rocklizard rear bumper and fender flares. They'll probably scratch off the flare ... oh well.
Author:  kolesy [ Mon May 14, 2007 4:07 pm ]
Post subject: 
sqliberty wrote:
I had Line-X do mine, but Hurculiner looks like it would be good for DIY. the spray can stuff is good for some stuff,(pinche weld, hitch, Etc. but a bit thin for rockrails IMO


But think about it, Even all that expensive bedliner stuff will not hold up to thrashing on the rocks. Thats why I suggested going the cheap route, easy inexpensive touch up, like dirtykj said.

My $1.05
Author:  tjkj2002 [ Mon May 14, 2007 4:09 pm ]
Post subject: 
kolesy wrote:
sqliberty wrote:
I had Line-X do mine, but Hurculiner looks like it would be good for DIY. the spray can stuff is good for some stuff,(pinche weld, hitch, Etc. but a bit thin for rockrails IMO


But think about it, Even all that expensive bedliner stuff will not hold up to thrashing on the rocks. Thats why I suggested going the cheap route, easy inexpensive touch up, like dirtykj said.

My $1.05
X3----It doesn't matter what type you have it's going to get scrapped off on the rocks.
Author:  jdumont [ Mon May 14, 2007 4:40 pm ]
Post subject: 
Yea i didnt read the post well, i agree, nothing will keep rock rails looking new other than touching up often....
Author:  desertkj [ Mon May 14, 2007 5:00 pm ]
Post subject: 
I dont know if I would do bedliner on there. First, its gonna get damaged quickly and probably start to flake off when it does. Second, its more expensive than paint. And finally, I dont know if I would want the extra grip on rockrails.
Author:  BlueFreedom [ Mon May 14, 2007 5:01 pm ]
Post subject:  Rock Rail protection...
Thanks for the advice guys!

- Brian
Author:  sqliberty [ Mon May 14, 2007 6:51 pm ]
Post subject: 
I hear you guys, but if your not scraping them all the time the Line-X looks real nice, did the brush guard too. No chips, no peeling and no rust and it has been about 3 years now

Image

Image
Author:  AndySRT [ Mon May 14, 2007 7:31 pm ]
Post subject: 
If you are planing on hitting rocks or using them alot do not bedliner them. I did that to my broncos rock rails as a experiment and it just peeled right off on my first trip out on the rocks.
Author:  Dje Ryu [ Mon May 14, 2007 8:16 pm ]
Post subject: 
I plan to use a roll-on bedliner on the top of my step-skinks but only on the part that I'll be using for steps. The rest is just gonna get a gloss black that I can touch up easily and cheaply.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/