Get the applicator tool too while you're at it. Otherwise you have to use a plier to pull down the center shaft while holding the base up (with screwdriver or something) --- awkward but can be done
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Rivets Part #? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=22186 |
Page 1 of 1 |
| Author: | renegadekj [ Mon Jul 02, 2007 9:45 pm ] |
| Post subject: | Rivets Part #? |
Trying to find that darn part number for the front bumper rivets from napa? Did a search but nothing except for the flare rivets #...Unless their the same. Thanks for the help Josh |
|
| Author: | JDaPP [ Mon Jul 02, 2007 10:21 pm ] |
| Post subject: | |
Napa #770-2871 (6.33 dia (1/4 drill) is what it says on my package |
|
| Author: | renegadekj [ Mon Jul 02, 2007 10:29 pm ] |
| Post subject: | |
Thanks for the help! |
|
| Author: | dirtykj [ Tue Jul 03, 2007 10:31 am ] |
| Post subject: | |
Get the applicator tool too while you're at it. Otherwise you have to use a plier to pull down the center shaft while holding the base up (with screwdriver or something) --- awkward but can be done
|
|
| Author: | renegadekj [ Tue Jul 03, 2007 8:15 pm ] |
| Post subject: | |
I will make the pliers work one way or another! Thanks
|
|
| Author: | JDaPP [ Tue Jul 03, 2007 8:41 pm ] |
| Post subject: | |
Try a set of pliers against the rivet and a Vice grip to pul the extension. I broke acouple that way, but once I got the hang of it, it worked great and you'll have plenty in the box to work with |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|