Normally I would use the search button to look for this. Anyone have the part number for rear spring iso's? Also how many should I get? I see some have 2-3, need some insight.
Thanks

_________________
$$$$
03 Liberty - Borla
2000 Dak Quad Cab - 31 Mich ATs

Is it number 9 by chance?

_________________
$$$$
03 Liberty - Borla
2000 Dak Quad Cab - 31 Mich ATs

No, that's the isolator on the front spring. I'll get ya the number for your part in a minute...

(feel free to hum the 'Jeopardy' theme while I look it up)

EDIT: OK, top isolator: 52088707AA, bottom isolator: 52128524AA. Just checked and it shows the same number for '05 as well.

_________________
Kevin
AD5VG
Just another red Jeep in the world...
L.O.S.T. #KB051963

It depends on how much lift you want to get in the back. 1 isolator is 1/2 thick. I think tjkj said that you can't use more than 3 or your spring will fall out. If you raise the back like that you will have to add conduit nuts to the front to even it out some unless you want it racked like that.

_________________
05 Liberty 4x4, Atlantic Blue
Extended Breathers
3/4 Mopar Skids
OME Lift, 245/75/16 General Grabbers AT2, ProComp Extreme Alloys 7189
Mopar Tow Hooks