| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| The Wave Edition, an explanation http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=25522 |
Page 1 of 2 |
| Author: | KJ4ME [ Wed Oct 17, 2007 12:08 am ] |
| Post subject: | The Wave Edition, an explanation |
before any pictures are inserted, i would like to give an explanation of what the heck the plan is. the idea for this theme was created by myself because i dont want to jack it up to the sky, or put lots of lights on it just yet. i want it to look as fun as it is for me to drive every day. being the mild surfer that i am, i wanted to convey that on the car as best as i could, hence the wave edition. this will be the center of the theme, as a cyan blue vinyl wave will be put on both the driver and passenger sides of the liberty starting from the bottom of the rear door towards the front door all the way to the top of the rear taillights, going underneath the rear door handles in a rounded mild wavy form. this blue theme will carry to the interior with various painted panels and trim pieces. since cyan blue is, to me, a very subtle color, i needed something that popped with it. yellow came to mind as these are my two favorite colors, but it wasnt wild enough. so, bring on the magenta/hot pink! since this is an accent color, dont worry, there will be no huge vinyl of hot pink anywhere, but instead all of the badging will be replaced with magenta/hot pink lettering by way of decalfx.com and jazz it up auto here in Colorado. other than exterior modifications, interior lighting will also be upgraded and reflect these colors, but since the interior is still in the works i cannot say what will be lit and what wont be. there is a plaque that i had made specifically for this jeep that will be placed in the interior once it starts to come together after the 26th of November. all of this will hopefully give my jeep a more "playful" stance when later it gets lifted and bigger tires and lights everywhere. since im not a serious person, i can have the jeep looking too serious about life, lol. as far as durability, it will be in the shop from the 5th of november to the 26th so that the tech guys can make sure it fully bonds and adheres to the body of the vehicle, so that a tree dosent snag the vinyls off. normally it wouldnt have to be replaced for every 2-3 years, but because mine will be exposed to off roading, it will have to be closely monitored and possibly be replaced every year however that is worst case scenario. i invite you all to stay tuned as i think this will be one of those very different transformations... _________________ |
|
| Author: | BeepBeepJeepJeep [ Wed Oct 17, 2007 12:23 am ] |
| Post subject: | Re: The Wave Edition, an explanation |
KJ4ME wrote: before any pictures are inserted, i would like to give an explanation of what the heck the plan is. the idea for this theme was created by myself because i dont want to jack it up to the sky, or put lots of lights on it just yet. i want it to look as fun as it is for me to drive every day. being the mild surfer that i am, i wanted to convey that on the car as best as i could, hence the wave edition. this will be the center of the theme, as a cyan blue vinyl wave will be put on both the driver and passenger sides of the liberty starting from the bottom of the rear door towards the front door all the way to the top of the rear taillights, going underneath the rear door handles in a rounded mild wavy form. this blue theme will carry to the interior with various painted panels and trim pieces. since cyan blue is, to me, a very subtle color, i needed something that popped with it. yellow came to mind as these are my two favorite colors, but it wasnt wild enough. so, bring on the magenta/hot pink! since this is an accent color, dont worry, there will be no huge vinyl of hot pink anywhere, but instead all of the badging will be replaced with magenta/hot pink lettering by way of decalfx.com and jazz it up auto here in Colorado. other than exterior modifications, interior lighting will also be upgraded and reflect these colors, but since the interior is still in the works i cannot say what will be lit and what wont be. there is a plaque that i had made specifically for this jeep that will be placed in the interior once it starts to come together after the 26th of November. all of this will hopefully give my jeep a more "playful" stance when later it gets lifted and bigger tires and lights everywhere. since im not a serious person, i can have the jeep looking too serious about life, lol.
as far as durability, it will be in the shop from the 5th of november to the 26th so that the tech guys can make sure it fully bonds and adheres to the body of the vehicle, so that a tree dosent snag the vinyls off. normally it wouldnt have to be replaced for every 2-3 years, but because mine will be exposed to off roading, it will have to be closely monitored and possibly be replaced every year however that is worst case scenario. i invite you all to stay tuned as i think this will be one of those very different transformations... _________________ Hopefully the wave doesn't crash into the beach |
|
| Author: | KJ4ME [ Wed Oct 17, 2007 12:26 am ] |
| Post subject: | |
hopefully it dosent crash into anything! lol |
|
| Author: | tommudd [ Wed Oct 17, 2007 12:55 am ] |
| Post subject: | |
Cant wait to see it, I kept wondering what it was going to be, and kind of thought some beach/ocean type something, thats cool make it your own! |
|
| Author: | Diggerfreek [ Wed Oct 17, 2007 12:57 am ] |
| Post subject: | |
so when are we going timber bashing???? also, do you have tire chains for your bike??? j/k you game for Saturday? |
|
| Author: | KJ4ME [ Wed Oct 17, 2007 1:53 am ] |
| Post subject: | |
im very excited to have the project finally started. coordination took alot of energy and patience on both my end and jazz it up auto's end; i cant tell you how many times we went through color swatches, textures, materials, thicknesses, and so on. i know i probably have the title client from hell, but i had to make sure everything was a specific color. then we had to get locations and sizes for the sunroof (will be located over the cargo area, honda element style!) which was alot better since the headliner just kinda snaps off, lol. this wont be installed until mid next year. and early next year i get brake calipers painted and slotted rotors just to give it some visual edge. so its an ongoing project that luckily i wont have to have too deep of pockets to support! |
|
| Author: | KJ4ME [ Wed Oct 17, 2007 1:56 am ] |
| Post subject: | |
Diggerfreek wrote: so when are we going timber bashing????
also, do you have tire chains for your bike??? j/k you game for Saturday? what time saturday and where are we going and are you talking to me? lol |
|
| Author: | KJ4ME [ Wed Oct 17, 2007 6:39 pm ] |
| Post subject: | |
this thread has recieved a ton of views since last night! glad to see people at least stopping by to see what the deal is! |
|
| Author: | JJsTJ [ Wed Oct 17, 2007 6:45 pm ] |
| Post subject: | |
Interesting..... Why not, allyrand has the camo edition, somebody else has to do something visually interesting to a KJ too. I won't mention what my plans are until I can afford to do them right but it will be Hot! |
|
| Author: | Diggerfreek [ Wed Oct 17, 2007 6:45 pm ] |
| Post subject: | |
KJ4ME wrote: Diggerfreek wrote: so when are we going timber bashing???? also, do you have tire chains for your bike??? j/k you game for Saturday? what time saturday and where are we going and are you talking to me? lol now why in to world would i want to talk to you Like i posted in the co rockies section, Im thinking Saturday at noon (or maybe a little earlier depending on weather) of running buckley. figured i meet any one who wants to come at the albertsons at Mississippi and Buckley did rush345 want to go? |
|
| Author: | Diggerfreek [ Wed Oct 17, 2007 6:48 pm ] |
| Post subject: | |
JJsKJ wrote: Interesting..... Why not, allyrand has the camo edition, somebody else has to do something visually interesting to a KJ too.
I won't mention what my plans are until I can afford to do them right but it will be Hot! how about a photoshop cut?? now that you have caught my attention |
|
| Author: | KJ4ME [ Wed Oct 17, 2007 7:01 pm ] |
| Post subject: | |
i dont have photoshop... |
|
| Author: | Diggerfreek [ Wed Oct 17, 2007 7:05 pm ] |
| Post subject: | |
let me see if i can find my disk |
|
| Author: | KJ-BOL [ Wed Oct 17, 2007 7:17 pm ] |
| Post subject: | |
JJsKJ wrote: Interesting..... Why not, allyrand has the camo edition, somebody else has to do something visually interesting to a KJ too.
I won't mention what my plans are until I can afford to do them right but it will be Hot! Dont forget the orange edition KJ (tjkj2002) -heck....he even has orange tees, caps, etc - orange everything! |
|
| Author: | Green Renegade [ Wed Oct 17, 2007 7:49 pm ] |
| Post subject: | |
AND the Army Edition |
|
| Author: | tommudd [ Wed Oct 17, 2007 8:12 pm ] |
| Post subject: | |
Yes there is and I want to do a little more to it , I get more comments when I am out about the decals I have on the sides and rear gate than the lift almost, have caught people taking pictures of it, heard one tell his wife it must of been an imported version as Jeep never made that model in the US So yep make it your own and enjoy the looks and stares! Now that we have at least 4 or so special versions do we get discounts on parts from anyone? Tom |
|
| Author: | Jeep Dawg [ Wed Oct 17, 2007 8:16 pm ] |
| Post subject: | |
hey man, I am very intrested in how this is going to come out. Sounds like something pretty unique. I myself have a few ideas on a theme for my KJ. Like some one else said, when I get the money to do it, I will explain my idea. |
|
| Author: | Guest [ Wed Oct 17, 2007 8:25 pm ] |
| Post subject: | |
I always assumed that "Wave" edition meant Jeep wave and I thought it was an inside joke. Go figure |
|
| Author: | KJ4ME [ Wed Oct 17, 2007 8:32 pm ] |
| Post subject: | |
tommudd wrote: Yes there is and I want to do a little more to it , I get more comments when I am out about the decals I have on the sides and rear gate than the lift almost, have caught people taking pictures of it, heard one tell his wife it must of been an imported version as Jeep never made that model in the US
So yep make it your own and enjoy the looks and stares! Now that we have at least 4 or so special versions do we get discounts on parts from anyone? Tom pics? |
|
| Author: | tjkj2002 [ Wed Oct 17, 2007 8:44 pm ] |
| Post subject: | |
KJ-BOL wrote: JJsKJ wrote: Interesting..... Why not, allyrand has the camo edition, somebody else has to do something visually interesting to a KJ too. I won't mention what my plans are until I can afford to do them right but it will be Hot! Dont forget the orange edition KJ (tjkj2002) -heck....he even has orange tees, caps, etc - orange everything! |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|