ShoreRenegade wrote:
Sir Sam wrote:
Could be anything from the control buttons, to the actuator, to the clock-spring.
it is encouraging that your light comes on(I suspect the clockspring is fine if that is the case), I would investigate the control buttons or the actuator.
So it's not a fuse issue or anything like that then?
I doubt it. Snag some cruise buttons at the junkyard and switch em out. otherwise, make sure the actuator is plugging in, make sure it has a good vacuum source, and lastely make sure the cable is actually connected!
_________________
http://www.Colorado4Wheel.com
"Its not about what you can
DO with your Jeep, its about where you can
GO with your Jeep."
Knowledgeable - But Caustic