| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| spark plug gap http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=26253 |
Page 1 of 1 |
| Author: | _UnLiMiTeD_ [ Tue Nov 06, 2007 2:49 pm ] |
| Post subject: | spark plug gap |
What is the gap supposed to be set at for the spark plugs on my liberty? it goes into the shop in a few days for the tune up. Thanks! |
|
| Author: | Jeep Dawg [ Tue Nov 06, 2007 2:53 pm ] |
| Post subject: | |
it should say on a sticker afixed to the top of the grille. I know mine is .35 to .45 on my 03 Sport Depends on the plugs that you use. I use good ol champs. I find they work better. Bosch are another good plug that I use. |
|
| Author: | _UnLiMiTeD_ [ Tue Nov 06, 2007 3:01 pm ] |
| Post subject: | |
ac delco platinums is what i use for min |
|
| Author: | Jeep Dawg [ Tue Nov 06, 2007 3:32 pm ] |
| Post subject: | |
With AC plugs, you should be good with a .35 gap I am sure others will say .30 or so. but .35 is a good gap for the ac plug |
|
| Author: | tjkj2002 [ Tue Nov 06, 2007 4:08 pm ] |
| Post subject: | |
Look under your hood,on the top raditor support there should be a emissions sticker,it will have the proper plug gap for your year KJ.Per my emission sticker my '02 KJ requires 0.042 plug gap. |
|
| Author: | _UnLiMiTeD_ [ Tue Nov 06, 2007 4:27 pm ] |
| Post subject: | |
alright, will do thanks guys |
|
| Author: | snowsport [ Tue Nov 06, 2007 9:14 pm ] |
| Post subject: | |
tjkj2002 wrote: Look under your hood,on the top raditor support there should be a emissions sticker,it will have the proper plug gap for your year KJ.Per my emission sticker my '02 KJ requires 0.042 plug gap.
Thanks for pointing that out, I didn't notice it when I did my plugs last week. My 03 says .040. I set them at .044, does that make a big difference? The plugs I took out (I had the dealership change them last time) were all set at .050 except one, which was at .055. |
|
| Author: | Rush345 [ Tue Nov 06, 2007 11:27 pm ] |
| Post subject: | Bosch Platinum +4 |
I got these last year from AMSOIL. now I see they are selling a different plug my mech was apposed to installing in my '02 Liberty. Can anybody tell me the 411on these plugs are they OK or should I shy away from putting these in??? |
|
| Author: | _UnLiMiTeD_ [ Tue Nov 06, 2007 11:33 pm ] |
| Post subject: | |
which plug would that be? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|