Part time light and 4lo???

Nailed2cross · **Posted:** Wed Dec 26, 2007 11:05 am

Hey Guys, well I just got a 2006 liberty sport 4x4, I noticed the other day that my part time light was on when I was in 2wd and would go off when I was in 4hi so I put it into 4lo and my 4lo light was not on whe n locked into 4lo but it did come on right in between netral and 4lo I was thinking that it might be some kind of sensor and I checked the plug on top of the tranfercase. Could you guys please give me some insight?

sleeve84028 · **Posted:** Wed Dec 26, 2007 11:10 am

If you are still under warranty just have the dealer you bought it from deal with the sensor. Which by the way, it is the lever sensor that is out of adjustment.

Nailed2cross · **Posted:** Wed Dec 26, 2007 12:20 pm

I bought the jeep used and its no longer under warranty where can I find the lever sensor and do you know how to adjust it? Thanks

Jeep Dawg · **Posted:** Wed Dec 26, 2007 12:29 pm

the lever sensor went in my 03 kj as well. I never bothered to replace it. All it does is tell you when you are in 4wd. Nothing else. at a time when I was in 2wd the 4wd light would be on.
All it does is light up. it does not have any mechanical issues with it.

Nailed2cross · **Posted:** Wed Dec 26, 2007 1:25 pm

so there is really no reason to bother replacing it? so it does not bother with the engine or the compression ratio when in 4lo? Thanks for the feed back

valvestem · **Joined:** Thu Jul 07, 2005 7:01 pm **Posts:** 222

http://www.jeepkj.com/forum/showthread.php?t=34345 See this URL for more info on your issue.

Nailed2cross · **Posted:** Wed Dec 26, 2007 2:08 pm

Thanks

dloc_jeep_KJ · **Posted:** Wed Dec 26, 2007 4:06 pm

yeah mines been out for a few months now too. i figured i didnt need it to tell me i was in 4 wheel anyways. it really doesnt bother me enough to fool with it

Nailed2cross · **Posted:** Mon Dec 31, 2007 12:16 pm

ok the other day I went on a trail after it rained and put it in to 4hi worked fine climbed a small hill and then put it into 4lo and all 4 wheel woork in unison but it felt as if it was not pulling any different than in 4hi..... is this just my imagination or does this still have to do with the sensor?

pokefan · **Posted:** Mon Dec 31, 2007 12:58 pm

are you sure it was fully engaged? 4lo has a different gear ratio and you would definitely be able to tell a difference if it were. You really have to pull to get it into 4lo. I usually have to play a bit from a slow roll in neutral to get it to engage.

Nailed2cross · **Posted:** Mon Dec 31, 2007 1:24 pm

is your tcps out as well

Black_Dog · **Posted:** Mon Dec 31, 2007 1:48 pm

I had the same problem (discussed here). It corrected itself after about a week and has not come back.

Part time light and 4lo???

Who is online