LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

got a proposition for yall
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=27726		 Page 1 of 2
Author:  riptricket [ Wed Dec 19, 2007 11:02 pm ]
Post subject:  got a proposition for yall
okay... here are my thoughts.

my current roof rack setup...Image
and Image
as many other have. my black widow roof basket does not hold much weight... i can not stand or sit in it without bending it, and i have an idea...

FIRST - LineX the entire roof, excluding under the lightbar b/c that would be a pain...

SECOND - Purchase Rock Lizards Gecko HD Roof Rails and attach...

THIRD - Build a contraption to hold stuff in... like a clamp around the ever strong gecko rails, and a piece welded to it so i could squish things together...

that is what i am thinking...i know it will not be as cheap as my current setup, but i do not like my current setup.
Author:  Jeepjeepster [ Wed Dec 19, 2007 11:20 pm ]
Post subject: 
Rocks Gecko setup looks pretty sweet. It would be hard NOT to get that if I was in the market. :)
Author:  jsc7002 [ Wed Dec 19, 2007 11:31 pm ]
Post subject: 
how about making your own roof rails :?: its not hard and they can be real strong
Author:  riptricket [ Wed Dec 19, 2007 11:38 pm ]
Post subject: 
no welder... and i asked the discount muffler down the road and they say on their sign "we weld kids toys for free" and i asked them to weld my toy... my old roof rack setup and they slapped a bill on me of $50 and i said alright C-YA!!!
Author:  callaway [ Wed Dec 19, 2007 11:51 pm ]
Post subject:  Re: got a proposition for yall
riptricket wrote:
i can not stand or sit in it without bending it


sit on the roof often :P
Author:  riptricket [ Thu Dec 20, 2007 12:55 am ]
Post subject: 
yeah i use my telescope up there sometimes with the gf and lay up there sometimes star gazing!
Author:  callaway [ Thu Dec 20, 2007 12:59 am ]
Post subject: 
very cool


why not go with the gecko basket rack from rl?
Author:  riptricket [ Thu Dec 20, 2007 1:08 am ]
Post subject: 
too expensive
Author:  Landy [ Thu Dec 20, 2007 1:41 am ]
Post subject: 
Hey Rip,

Can you 'lace' some 1/8" x 2" flatbar or something up there for added strength?
Author:  jsc7002 [ Thu Dec 20, 2007 1:55 am ]
Post subject: 
this was th start of my roof rack, but I think it would work great to mount baskets on also and total it cost me about $10, and I have a welder I could weld some up, and obvisouly they wouldnt need to be that long mine were just b/c I made a full length roof rack, and it would also give you a low profile


Image
Author:  riptricket [ Thu Dec 20, 2007 9:39 am ]
Post subject: 
so you could weld me some up...
i still need to check the pricing on the LineX for the roof, but i don't think it would be that bad...
if you were me... how would you have them LineX the roof... upto the renny lightbar, or all the way through from the front of the KJ to the back?
b/c there is that spot about 1" (I'd go outside and measure it but i'm still kinda sick and it's nice and warm in my bed and cold outside) or so right between the top of the windshield and the renny lightbar...
Author:  MiniDevil [ Thu Dec 20, 2007 9:45 am ]
Post subject: 
riptricket wrote:
yeah i use my telescope up there sometimes with the gf and lay up there sometimes star gazing!


Don't ya find the grates on ya arse painful? ;)
Author:  riptricket [ Thu Dec 20, 2007 9:48 am ]
Post subject: 
no i did what swyszomirski said he does... i throw a mat thing up there... he had a great idea and i went with it!
Author:  MiniDevil [ Thu Dec 20, 2007 9:52 am ]
Post subject: 
Good idea. Now we just need that rear bumper with a ladder to the roof rack.

I'll definately be in the market for a roof rack after the new year.
Author:  WoodysKJ [ Thu Dec 20, 2007 9:55 am ]
Post subject: 
riptricket wrote:
no i did what swyszomirski said he does... i throw a mat thing up there... he had a great idea and i went with it!



If you can't go Gecko...

One other thing you could do is fit a piece of 3/4" plywood for the floor of the basket. fit it in there, drill holes for u bolts then prime and paint it (maybe even herculine it after you prime it for a non skid surface) to preserve it. The board will act as a "Snow Shoe" effect and distribute your weight accross the entire basket and not sagging in the middle. I would use a good B/C grade plywood, sand it finish it and it would last a long while. Maybe even MDF (Medium Density Fiber). stronger and heavier, but cheaper than plywood and hold paint real well. drill it, counter sink the bolts and stand up there with no worries.

In looking again at your current set up, can you get longer u bolts that hold the basket now and just use those bolts and their locations to hold the board and basket all at once.
Author:  Jeepman56 [ Thu Dec 20, 2007 11:04 am ]
Post subject: 
Could you move your cross bars closer together and attach the rack that way? This (in theory) would bring your supports closer and help to even out the load rating in the middle section. Just a thought.
Author:  jsc7002 [ Thu Dec 20, 2007 12:39 pm ]
Post subject: 
if I were bedlining my Jeep Id want to go all the way, yes it would be a pain in the butt but it would be worth it in the end, Im waiting till summer and a little bit more money and Im thinking I will bedline the whole exterior like Wally, I found some Hunter Green that I think would look awesome, but I need to find out if it was UV protectant, plus it would cover some of the rust I put on my Jeep
Author:  jdumont [ Thu Dec 20, 2007 1:08 pm ]
Post subject: 
I Herculined the entire lower half of my jeep with Herculiner. Came out really nice but started to fade after a couple of months. I have found that just some normal aerosol tire wet stuff keeps it looking nice and black for a long time and costs almost nothing per application.
Author:  jsc7002 [ Thu Dec 20, 2007 1:45 pm ]
Post subject: 
jdumont wrote:
I Herculined the entire lower half of my jeep with Herculiner. Came out really nice but started to fade after a couple of months. I have found that just some normal aerosol tire wet stuff keeps it looking nice and black for a long time and costs almost nothing per application.


could you mix it in with the bedliner?? can you send me some pics? did you do it yourself or did you take it somewhere to have it done?, sorry for all the questions im really curious about it and am really wanting to cover my KJ in it :)

thanks
Author:  jdumont [ Thu Dec 20, 2007 2:21 pm ]
Post subject: 
I don't think you would want to mix anything with bedliner for fear of ruining the batch or something odd happening. I did the job myself. Wasn't too hard, the more you prep the better the results...

Image

This is a pic pretty much the next day after i did the work... before the ARB bumper and lift and chunky tires...

josh
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/