I've decided I don't want or need a full bumper. Just some really worthy tow points. Not mopar hooks. Any Ideas? I like the detours backbone but I don't need the winch. It would feel like a waste to buy it just to grind off the winch mount plate. Is there anything in production out there? I've seen a few custom fabbed shackle points on here but I dont know if I could trust myself with that.

_________________
2006 3.7 sport
OME HD & Ranchos, Al's 4.5 arms, extra rear spring pad and clevis
31x10.5x15 BFG, Cragar 397 15x7 4.25"bs

nope thats all there really are, Mopar, bumper, Detours and ones you make, have you seen the one made from a ball mount? its nice looking and very strong

_________________
1980 Jeep CJ7 Buggy
SOA, D44/ FF14B, SBC 350, SM465, NP205, 108" WB, 37" MTs

http://www.dpgoffroad.com/
http://www.ucora.org/
http://www.christianoffroad.com/
http://jeepinbyal.com/

here it is:
http://www.jeepkj.com/forum/showthread.php?t=25615

and if you get enough of a drop, I think around 3" you shouldnt have to trim your bumper

_________________
1980 Jeep CJ7 Buggy
SOA, D44/ FF14B, SBC 350, SM465, NP205, 108" WB, 37" MTs

http://www.dpgoffroad.com/
http://www.ucora.org/
http://www.christianoffroad.com/
http://jeepinbyal.com/

you can get a D shackle from a trucking supply place and the bracket that it mounts to and place it on the unibody frame where he fatory holes are

_________________
2006 kj4x2 rough country 3" rear springs 265/75 r16 maxxis big horns wrapping cragar soft 8s arb bumper k&N air and oil filters, x factor forks and lca
next: al's control arms and 4 inch kit

118962

Thanks for the reply. Saw that one, I'm not sure where they will come out of my bumper. Don't like the idea of the 3" drop. I think it would put more stress on the bolts. I'll have to take a look and see where the holes are.

_________________
2006 3.7 sport
OME HD & Ranchos, Al's 4.5 arms, extra rear spring pad and clevis
31x10.5x15 BFG, Cragar 397 15x7 4.25"bs

i used a 2" drop and did some mild trimming. looks great!!! i just did the other side today ive been putting it off for a while. ive pulled a few people w/ it and it works great i even use it to jack the libby up w/ the high lift sometimes.

_________________
cactus green 03 sport 3.7
Rusty's coil lift w/ Rancho RSX shocks & 3 ring clevis
custom skids and rock rails ; Surco roof rack w/ hi lift mounted
pioneer cd/aux with Zune mounted on dash; uniden cb with 4' K40 antenna
xeon lights; grill inserts; black wheels; 245/75/16s MTRs
#1281 http://www.cardomain.com/ride/2967585/1

Mopar hooks will do just fine
unless you do something stupid

have yet to see one bend or break on a YJ/TJ and I wheel 2+ times a month
the hooks for the KJ are bigger

...where the holes are: