| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 4 clevis rings and a strut spacer? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=29251 |
Page 1 of 1 |
| Author: | BeepBeepJeepJeep [ Wed Feb 06, 2008 12:49 pm ] |
| Post subject: | 4 clevis rings and a strut spacer? |
I just ordered the strut spacers from rusty's and was wondering if it'd be safe for me to put an additional clevis ring on as well? Thanks, Bill |
|
| Author: | dloc_jeep_KJ [ Wed Feb 06, 2008 12:57 pm ] |
| Post subject: | |
i wouldnt think so. check ur CV angles w/ just the strut spacer and go from there.. its really up to u its ur jeep. u should be good w/ 3 ring clevis and a strut spacer. what are u doing to the rear to level it out?? if u do it let us know how it comes out. i would even like to know how just the 3 ring clevis and spacer look if thats what u go w/. if u could post pics that would be awesome!!!! |
|
| Author: | BeepBeepJeepJeep [ Wed Feb 06, 2008 1:02 pm ] |
| Post subject: | |
dloc_jeep_KJ wrote: i wouldnt think so. check ur CV angles w/ just the strut spacer and go from there.. its really up to u its ur jeep. u should be good w/ 3 ring clevis and a strut spacer. what are u doing to the rear to level it out??
I have two extra iso pads back there so it should be pretty even... |
|
| Author: | tommudd [ Wed Feb 06, 2008 1:27 pm ] |
| Post subject: | |
Thats going to be pushing it to the limits of getting decent alignment, of course some people dont care if its not within the limits but......you could always do it see what the angles look like and the alignment and if not take some out. I would say three rings and the spacer would be about it. Of course you do have Rustys springs so they will settle a lot more than a set of OMEs |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|