If ya mess it up too bad Ernie, I have a factory Sport bumper with fogs up in the rafters
Would be a bunch of work just to cut a 05 bumper!!
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 03 / 05 front bumper http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=29412 |
Page 1 of 1 |
| Author: | pafireman80 [ Mon Feb 11, 2008 4:38 pm ] |
| Post subject: | 03 / 05 front bumper |
I need to know if there is a difference in the mounting points between a 03 front bumper and an 05 front bumper. I have an 03 sport, but I would like to put an 05 front bumper on it. The reason I would like to do this: The 05 front bumper is much easier to cut, and looks alot better after it is cut then the 03. Has anyone ever looked into this before? What is the likelyhood that this will work? Any input would be appreciated. |
|
| Author: | daspes [ Mon Feb 11, 2008 4:40 pm ] |
| Post subject: | |
Not sure about the mounting points, but you will have to replace the front fenders as well. |
|
| Author: | tommudd [ Mon Feb 11, 2008 4:47 pm ] |
| Post subject: | |
isnt there some difference in the grill as well? so grill, front fenders, bumper so far |
|
| Author: | tjkj2002 [ Mon Feb 11, 2008 4:53 pm ] |
| Post subject: | |
tommudd wrote: isnt there some difference in the grill as well? so grill, front fenders, bumper so far Also add the front flares,front wheel liners,and depending on the style of '05 the hood as well(from the flat hoods from some rennies and RM editions).But as far as the general mounts go they should be the same or very close.
|
|
| Author: | Tokyojoe [ Mon Feb 11, 2008 4:53 pm ] |
| Post subject: | |
What do you mean by "cut?" |
|
| Author: | pafireman80 [ Mon Feb 11, 2008 4:58 pm ] |
| Post subject: | |
I think I will just find a way to do a cut on the stock 03 bumper and try to make it look as good as I can..... I did not even take into consideration all of the body changes. Thanks for all the info. |
|
| Author: | tommudd [ Mon Feb 11, 2008 5:02 pm ] |
| Post subject: | |
If ya mess it up too bad Ernie, I have a factory Sport bumper with fogs up in the rafters Would be a bunch of work just to cut a 05 bumper!!
|
|
| Author: | Blue KJ in PA [ Mon Feb 11, 2008 5:41 pm ] |
| Post subject: | |
03 will cut nicely... 
|
|
| Author: | Sir Sam [ Mon Feb 11, 2008 9:19 pm ] |
| Post subject: | |
Blue KJ in PA wrote: 03 will cut nicely...
mmm nice wheels on the 5.9 |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|