Available at any Napa Auto Parts. The part # is BR256 and is about $20. It's behind the glove compartment. I used the instructions found on the link "Sleeve84028" posted prior to mine.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Blower Motor Speed Control http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=33902 |
Page 1 of 1 |
| Author: | mikego [ Sun Jul 06, 2008 1:33 pm ] |
| Post subject: | Blower Motor Speed Control |
The #2 setting on my speed control for the heater blower stopped working. Is this liable to be the switch or does the liberty use the resistor block in the duct work? If it has the resistor block does anyone know where it is? Thanks, |
|
| Author: | sleeve84028 [ Sun Jul 06, 2008 7:35 pm ] |
| Post subject: | |
Here you go: HVAC resistor block |
|
| Author: | MaineSleddah [ Tue Jul 08, 2008 5:50 pm ] |
| Post subject: | |
Available at any Napa Auto Parts. The part # is BR256 and is about $20. It's behind the glove compartment. I used the instructions found on the link "Sleeve84028" posted prior to mine.
|
|
| Author: | zappa [ Wed Jul 09, 2008 1:55 pm ] |
| Post subject: | |
I have a different problem on my 2003, all speed 1,2 and 3 work fine, but not the speed 4. It's happend this winter, one morning I start my jeep at -35°C and the fan was left on the speed 4...bang no more speed 4. Anybody have the same problem??? |
|
| Author: | mikego [ Fri Jul 18, 2008 9:12 am ] |
| Post subject: | |
Thanks for the help, $16.05 later and 15 minutes in the driveway and all is well. I would have replyed sooner but we had a "dress rehearsal" on the new family member arriving. It turned into a false alarm but she should be arriving any day now !! Thanks, Mike G. |
|
| Author: | sleeve84028 [ Fri Jul 18, 2008 11:13 am ] |
| Post subject: | |
congratulation on both fronts. 
|
|
| Author: | Wahoo650 [ Fri Jul 18, 2008 12:28 pm ] |
| Post subject: | |
Zappa, Same fix for your problem. Replace the resistor block-couldn't be easier. It just sucks that DCX never fixed this issue, all years appear to be susceptible to the failure. |
|
| Author: | DryBones [ Wed Jul 30, 2008 8:22 pm ] |
| Post subject: | |
$22 from the dealer and 10 minutes in the driveway and now my #1 is working again! Gotta love this site. The $85 saved on the labor gets to go in my lift fund! 
|
|
| Author: | venturaII [ Fri Aug 01, 2008 12:10 pm ] |
| Post subject: | |
Just did the same to my '04 last weekend. 15 minutes, taking my time and not knowing what to expect. 5 minute job at most. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|