| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Transmission skid. http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=3547 |
Page 1 of 1 |
| Author: | Jeepjeepster [ Sat Nov 19, 2005 12:18 pm ] |
| Post subject: | Transmission skid. |
What are the part numbers on the tranny skids? One is for the full price one and the other is for the tranny skid with no bolts and its like $24. Can i get that at the dealer, or are they going to tell me it wont fit my 2004 and not give it to me, even though i know i can make it fit? thanks guys |
|
| Author: | DaveKJ02 [ Sat Nov 19, 2005 12:31 pm ] |
| Post subject: | |
There's a lot of confusion with this skid at the dealerships. I think the descriptions are a bit funky. If you dont have a 05-06, just get the cheaper one and use some bolts. Dont let them tell you you cant order what part you want. When I placed the order, they kept saying that's not the tranny skid-it's a shield!! I asked them to order it anyway and I would buy it. 52128925-AC for around $28-no hardware. I used this with some grade 8 bolts to fit onto an 02 KJ. I believe the confusion is the description for this part number is called "shield" in their catalog. 82210003 for $49 for the 05-06 models comes with some nutzerts. |
|
| Author: | Jeepjeepster [ Sat Nov 19, 2005 1:13 pm ] |
| Post subject: | |
so if i get the $28 dollar one, do i have to drill all the way through the cross memeber to bolt it up? I dont know what a nutzert is, so how do i put it on without them. Im not stupid, ive just never seen a nutzert?!? |
|
| Author: | DaveKJ02 [ Sat Nov 19, 2005 8:00 pm ] |
| Post subject: | |
Those nutzerts are designed to go in the facory hole and acts as the nut to recieve the bolt. Since your retrofitting, the all holes dont line up exactly so thats why I dont think it pays to get the nutzerts. |
|
| Author: | Jeepjeepster [ Sat Nov 19, 2005 8:16 pm ] |
| Post subject: | |
Do you know where any pictures are of someone putting a tranny skid on a libby. I would like to see what bolts i need so i can go ahead and buy them before i get the skid. i remember seeing a pic but cant find it now. |
|
| Author: | Androvsky [ Sat Nov 19, 2005 8:20 pm ] |
| Post subject: | |
Hi all. This is the Mopar Transmission Skid (52128925-AC) 
I'm going to install it soon. At first look, it's look like the hole does'nt fit very good. Just to see, anybody here with a picture of that plate instal ? Did you drill the body and tap ? tanks |
|
| Author: | krazz1e [ Sat Nov 19, 2005 8:22 pm ] |
| Post subject: | |
Jeepjeepster, on your '04 you'll have 2 holes that line up, one in the front and one in the back, you'll need to bend the little inserts show in the pics towards the left. you can then deciede to drill the other 2 holes, or just keep the 2.... that way if you bend it you can unbolt and buy another 
Really, this is cheap protection and can take some absue, however know your limits. |
|
| Author: | priell3 [ Sat Nov 19, 2005 8:38 pm ] |
| Post subject: | |
This thread has links to pics: http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=2221 |
|
| Author: | Androvsky [ Sat Nov 19, 2005 9:00 pm ] |
| Post subject: | |
hey Tanks priell3 ! We find every thing on this forum ! |
|
| Author: | Jeepjeepster [ Sun Nov 20, 2005 12:29 am ] |
| Post subject: | |
so i need to get, 3 ea 2 1/2" grade 8 and 1 3" bolts with nuts and washers. Thats what the guy in that thread had to get. I may not worry about it in the front where the engine skid sandwiches it. But on the tcase cross member, ill drill a hole. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|