It is currently Tue Mar 03, 2026 4:53 am

View unanswered posts | View active topics


Board index » KJ/KK/KL Liberty/Cherokee Discussion Areas » General Discussions

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 
  Print view Previous topic | Next topic 
Author Message
Fouros
 Post subject: changing PCV Valve
PostPosted: Mon Nov 03, 2008 10:35 pm 
Offline
Forum Admin
Forum Admin
User avatar

Joined: Fri Jul 08, 2005 2:18 pm
Posts: 2210
Location: Gold Coast Australia
Anybody got a How to or a quick guide to changing this sucker out,

i have 140,000 miles on my V6 and its starting to use a bit of Oil, i am just starting with the aesier stuff before i think about valve stem seals and the like

_________________
http://www.cardomain.com/memberpage/742957
aussie KJ Lost No#150605
3" OME lift + Rancho RS9000xl's front and rear
prototype Airflow snorkel
Magnaflow cat back
265/70R16 Hankook MTRT03 on MOABS baby
4.10's and a truetrac up front
super skinks
coming soon
a myride wireless controller
Top
 Profile  
 
tjkj2002
 Post subject:
PostPosted: Mon Nov 03, 2008 10:43 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Apr 01, 2006 9:38 pm
Posts: 12988
Location: Colorado Springs
Push and twist,clockwise if I remember right.
Top
 Profile  
 
Fouros
 Post subject:
PostPosted: Mon Nov 03, 2008 10:55 pm 
Offline
Forum Admin
Forum Admin
User avatar

Joined: Fri Jul 08, 2005 2:18 pm
Posts: 2210
Location: Gold Coast Australia
that hard eh

_________________
http://www.cardomain.com/memberpage/742957
aussie KJ Lost No#150605
3" OME lift + Rancho RS9000xl's front and rear
prototype Airflow snorkel
Magnaflow cat back
265/70R16 Hankook MTRT03 on MOABS baby
4.10's and a truetrac up front
super skinks
coming soon
a myride wireless controller
Top
 Profile  
 
DryBones
 Post subject:
PostPosted: Mon Nov 03, 2008 10:59 pm 
Offline
Jeep-O-Caching
Jeep-O-Caching
User avatar

Joined: Fri Oct 05, 2007 6:41 am
Posts: 1815
Location: Northern Virginia
they are brittle (don't ask) so be careful...or not , as you are just going to replace it anyway!

_________________
Jason
----------
Image
Top
 Profile  
 
jeepkj02
 Post subject:
PostPosted: Mon Nov 03, 2008 11:05 pm 
Offline
LOST Addict
User avatar

Joined: Thu Jul 07, 2005 2:11 pm
Posts: 1885
Location: Grand Rapids, MI
dont forget to take the hose off. A flat head screwdriver helps.

_________________
2002 Jeep KJ Sport 3.7L 4x4

245/75-16 Mastercraft Courser HSX, 16x7 Cragar, 2" OME MD Lift, ARB Bumper
AEM Brute Force Cold Air Intake, Flowmaster Super 44 Muffler

Currently working on: Full service on transmission & bed-lining ARB bumper

viewtopic.php?f=43&t=84650
Top
 Profile  
 
CrossBones
 Post subject:
PostPosted: Tue Nov 04, 2008 12:12 am 
Offline
LOST Junkie
User avatar

Joined: Mon Jul 21, 2008 11:52 am
Posts: 625
Location: DuPage County , IL
jeepkj02 wrote:
dont forget to take the hose off. A flat head screwdriver helps.


:-)r very important.

_________________
Illegitima Non carborundom!
Top
 Profile  
 
jdumont
 Post subject:
PostPosted: Tue Nov 04, 2008 7:03 am 
Offline
LOST Member
User avatar

Joined: Fri Aug 26, 2005 9:52 am
Posts: 483
Location: Rhode Island
What are the symptoms of a faulty PCV valve? Idle erratic?
I think i tried changing mine a year or so ago but decided against it when it wouldnt come out of the housing. I was afraid of fracturing it...

_________________
Pre-Lowered 02 Liberty
2.5" Rustys Coil w/ Ranchos in the rear.
ARB, OME927's, 1/4 strut plate and Als Gen 4.5 Uppers in the front.
Flowmaster Super 40 Series (GONE, SO QUIET!)
245/75/16 Kumho KL-78 w/ Spidertraxxxxx
Ripped out the plastic inner wheel liners
Herculined ALLLL over.....
Top
 Profile  
 
tmaxx26power
 Post subject:
PostPosted: Tue Nov 04, 2008 8:54 am 
Offline
LOST Newbie
User avatar

Joined: Mon Oct 06, 2008 7:10 pm
Posts: 24
Location: Sioux Falls,SD
I just replaced mine this last weekend. First remove the hose then push down slightly on the pcv valve and turn counter clockwise 90 degrees then pull it straight upward to remove it.

_________________
2004 Liberty LTD, Amsoil, Some Chrome Added, OE Mudflaps, Lund Ventvisors-Shield, Weathertech Floor Liners, K&N Drop In, Garmin GPS, OME Spring Lift-Rancho Shocks(Needs to be installed)
Top
 Profile  
 
SavageUrge
 Post subject:
PostPosted: Thu Nov 06, 2008 2:12 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sat Jul 16, 2005 10:46 am
Posts: 798
Location: Williamson, NY
I'm just checking here, but is our PCV the one that comes off of the oil filler spout? I just changed the oil and was about a quart low, so I'm thinking I'm starting to use oil. I've heard this is a symptom of a bad PCV. Any validity in this? Thanks!

_________________
2003 Renegade 4X4 5-Speed, Bright Silver *TRADED for 2013 Wrangler*
PIAA 520 Auxiliary Lights
Garmin GPSMAP 76S
DynoMax Ultra Flow SS Muffler
Amsoil Ea "Absolute Efficiency" Air Filter
Nokian Vatiiva 235/70/R16 Tires
Pixeldzn's "RENEGADE" decals
Support the 2nd Amendment - It's your right!
Top
 Profile  
 
jsc7002
 Post subject:
PostPosted: Thu Nov 06, 2008 3:18 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Mon May 22, 2006 6:28 pm
Posts: 3880
Location: Wichita/ Pittsburg, Kansas
how much does the PCV cost?

_________________
1980 Jeep CJ7 Buggy
SOA, D44/ FF14B, SBC 350, SM465, NP205, 108" WB, 37" MTs

http://www.dpgoffroad.com/
http://www.ucora.org/
http://www.christianoffroad.com/
http://jeepinbyal.com/
Top
 Profile  
 
SoDakJeep
 Post subject:
PostPosted: Thu Nov 06, 2008 5:14 pm 
Offline
LOST Junkie
User avatar

Joined: Mon Apr 02, 2007 6:02 pm
Posts: 548
Location: Aberdeen, SD
anyone have any pics of how to change this?

_________________
Its a Jeep Thing...
IF CAPS LOOK IS ON IM AT WORK DONT WORRY BOUT IT IM NOT YELLING HAHA

2005 RENEGADE 4X4
2.5 RUSTYS LIFT
245/75/16 GOODYEAR MTR'S
FULL TINT
13 MILES TO THE GALLON.....GOD darn HAHA
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 

Board index » KJ/KK/KL Liberty/Cherokee Discussion Areas » General Discussions

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 28 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com

Advertisements by Advertisement Management