| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| sway bar bushings with grease zert - what size? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=37952 |
Page 1 of 1 |
| Author: | scoobysnax [ Fri Dec 05, 2008 10:35 am ] |
| Post subject: | sway bar bushings with grease zert - what size? |
What is the diameter of the front sway bar? I need to order replacement bushings and want to get the ones with the grease zert on them. Also, if anyone knows the sizes that I would need for the bushings on the ends of the sway bar that link up to the wheel suspension that would be helpful too. If anyone else else has done this can you let me know where you got yours, the price and what the size was that you needed to order. Thanks! |
|
| Author: | jeepkj02 [ Fri Dec 05, 2008 11:23 am ] |
| Post subject: | |
A while back I asked a similar question. Dje Ryu (member on here) measured the diameter of the sway bar for me, turned out to be 1-7/32" which equals approximately 30.9mm. I found this 31mm sway bar bushing with a zerk on it http://www.jegs.com/i/Prothane/311/19-1187-BL/10002/-1 Can't guarantee you it will work. Otherwise you will have to drill and tap a zerk fitting into your OEM sway bar bushing. All J's has Daystar poly sway bar bushings for $25 http://www.boulderbars.com/kjproducts.htm For the sway bar end links, JBA has quick discos and oem sway bar end links and sway bar end link bushings http://jeepinbyal.com/cat-Front_Swaybar ... ts-19.aspx |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|