Those of you who have alloy wheels, if you've got one handy, can you measure the smallest part of your centercap? where the little clippy footie doo dads are?

Thanks

you mean just on the stock wheels?

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Yessir. Stockers, Moabs, whatever...trying to figure out what will fit.

OK I measured the hole itself in the wheel

inner....hole 1-7/8

outer where the cap fits down in 2-3/16

does that help any or you need more info

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

We're good to go, Tom, thanks

And no, don't be alarmed if your centercaps come up missing on the 25th...it wasn't ThunderbirdJunkie

Taking mine off before hand then! Plus I have some on these "junk wheels" some guy in a black KJ dropped off here

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Yea I got the same measurments as Tom.

_________________
2003 KJ Sport JEEPZILLA Edition
American Flag flying high
Frankenlift removed =(
Moabs and plenty of pin striping
Flexable people don't get bent out of shape!
Current MPG 6" to a gallon
L.O.S.T. # BL065211
www.ItAtYourHome.com