| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| what to do with $100 at the dealer? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=44299 |
Page 1 of 1 |
| Author: | jerbacher [ Thu Jun 18, 2009 10:14 am ] |
| Post subject: | what to do with $100 at the dealer? |
I have $100 'dealer dollars' as a reward from my Jeep Rewards credit card. Obviously these dollars can only be spent at the dealer. Theres nothing that immediatly comes to mind that I've been looking to add, though. So, I'm taking suggestions! I'd rather not spend any more cash then the $100. I'd also prefer to actually get something for the jeep, not a hat or t-shirt or mug or something else that I dont need and wont use. Some items I already have from Mopar: rubber floor mats roof top ski rack spare tire bike rack cargo organizer hitch (but no wiring, but i've never had the need to tow anything, hitch is just for recovery) front tow hooks |
|
| Author: | lil black liberty [ Thu Jun 18, 2009 10:38 am ] |
| Post subject: | |
Get some parts from them and then sell them on the forums and make some money my friend.. |
|
| Author: | jerbacher [ Thu Jun 18, 2009 10:39 am ] |
| Post subject: | |
lil black liberty wrote: Get some parts from them and then sell them on the forums and make some money my friend..
not a bad idea! |
|
| Author: | lil black liberty [ Thu Jun 18, 2009 10:46 am ] |
| Post subject: | |
Lol.. that's what I'd do but then again what I'd do and someone else would do could quite differ by about 150% |
|
| Author: | Cobalt-60 [ Thu Jun 18, 2009 11:40 am ] |
| Post subject: | |
Rear wiper blades... |
|
| Author: | jerbacher [ Thu Jun 18, 2009 11:53 am ] |
| Post subject: | |
Cobolt-60 wrote: Rear wiper blades...
ok... why? i have the original one on mine and no need to change it |
|
| Author: | Cobalt-60 [ Thu Jun 18, 2009 12:40 pm ] |
| Post subject: | |
jerbacher wrote: Cobolt-60 wrote: Rear wiper blades... ok... why? i have the original one on mine and no need to change it They do eventually wear out. Mopar are the only folks that make the proper size for it apparently. Each dealer seems to stock exactly one of them, if they stock them at all. Keep one, and you can sell the rest to those here who need them at a small profit, or sell them on E-bay for much more... |
|
| Author: | lil black liberty [ Thu Jun 18, 2009 12:45 pm ] |
| Post subject: | |
Cobalt.. I believe I picked mine up @ autozone I dont remember if it was a 13 or 14 and it fits perfect man |
|
| Author: | Cobalt-60 [ Thu Jun 18, 2009 12:54 pm ] |
| Post subject: | |
lil black liberty wrote: Cobalt.. I believe I picked mine up @ autozone I dont remember if it was a 13 or 14 and it fits perfect man
Well, that is interesting since the factory spec is for a blade that is 11" long I believe... |
|
| Author: | hrogi [ Thu Jun 18, 2009 12:56 pm ] |
| Post subject: | |
See if they are running any part deals. like buy 4 oil filters get 1 free.. Sell the card for $85 cash. so you have cash on hand. Also is this good only at your dealer? or any dealer? Some dealer sell parts for less than others. |
|
| Author: | lil black liberty [ Thu Jun 18, 2009 12:56 pm ] |
| Post subject: | |
maybe it was an 11.. eh.. I dont remember |
|
| Author: | Cobalt-60 [ Thu Jun 18, 2009 1:02 pm ] |
| Post subject: | |
lil black liberty wrote: maybe it was an 11.. eh.. I dont remember
If it fits and works that is great news!!!! The concern with a longer blade is that it will potentially cause more drag and put premature wear on the electric motor. If these are the same length as the fac spec then it is less likely to do so, and sounds like an awesome replacement!!!! |
|
| Author: | JeepinJarhead03 [ Thu Jun 18, 2009 1:31 pm ] |
| Post subject: | |
buy a 12-14 inch blade and cut it to fit coils are out, they're like 35 bucks a piece you could get a set of spark plugs, a bottle of mopar labeled armor all, a set of front mats, and an air freshener for about that much |
|
| Author: | SweepnChoke [ Thu Jun 18, 2009 2:13 pm ] |
| Post subject: | |
Order 50 of the plastic rivets for holding the flares/bumpers on and I'll buy them from you at 1/2 price plus shipping |
|
| Author: | JeepinJarhead03 [ Thu Jun 18, 2009 2:16 pm ] |
| Post subject: | |
pfft use the 7/16ths push pin style rivets like what hold the center of the fascia on and you don't have to replace them and they hold tighter than the oem rivets you non-believers! i swear! |
|
| Author: | Cobalt-60 [ Thu Jun 18, 2009 2:17 pm ] |
| Post subject: | |
SweepnChoke wrote: Order 50 of the plastic rivets for holding the flares/bumpers on and I'll buy them from you at 1/2 price plus shipping
Even that is overpriced!!!!! Check the link here (and order the pop rivets and tool from NAPA): http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=9316&start=80 |
|
| Author: | lil black liberty [ Thu Jun 18, 2009 2:17 pm ] |
| Post subject: | |
I believe you jeepin.. by the way man.. I need to talk to you tonight, got a huge question in the way of my upcoming "Wolf" mod I need to know what you would think about something.. |
|
| Author: | JeepinJarhead03 [ Thu Jun 18, 2009 2:19 pm ] |
| Post subject: | |
probably won't be on the computer after 4pm but ya know my number |
|
| Author: | lil black liberty [ Thu Jun 18, 2009 2:53 pm ] |
| Post subject: | |
Vatozone |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|