LOST JEEPS :: View topic - Idler/Tensioner Pulley

mine is going out too. :evil:

dealerships says i cant get just the smooth idler pulley and i have to buy the whole tensioner assembly and they want $118. do you guys know if its the same pulley and i would be able to get one for an older model or are they different between kk and kj?

You should really replace the whole tensioner anyways.
It could be going bad which may put more tension on the belt and cause the bearings to go out in the pulleys.
Just something to think about.
I replaced mine at about 85.000 I think it was

I carry a spare one in my box of spare goodies all of the time, never know when I may need one or someone else!

tommudd wrote:

I carry a spare one in my box of spare goodies all of the time, never know when I may need one or someone else!

Do you tow that "box" of spare goodies behind your KJ everywhere you go?
Must be killin the mileage!!
:ROTFL:

You should really replace the whole tensioner anyways.
It could be going bad which may put more tension on the belt and cause the bearings to go out in the pulleys.
Just something to think about.
I replaced mine at about 85.000 I think it was

This time Bub wasn't there to help me either! :mrgreen:

Terry

And not just when your glaucoma's acting up!!!

I can feel my eyes acting up now! :-)r

Terry
http://www.marijuana-picture.com/galler ... e_here.htm :dizzy:

Author:	Fulltimer [ Sun Jan 10, 2010 5:29 pm ]
Post subject:	Idler/Tensioner Pulley
It happened again! Bearing went out while on the trail. It was the smooth one this time. Now I have replaced the smooth one twice and the other one once. I was out with some members of my locale Jeep club. Lucky I wasn't alone! I was a long way from any town. But we got the part and replaced it in a Wal-Mart parking lot after they towed me. This time Bub wasn't there to help me either! Terry

Author:	DirtyKK [ Sun Jan 10, 2010 7:54 pm ]
Post subject:	Re: Idler/Tensioner Pulley
mine is going out too. dealerships says i cant get just the smooth idler pulley and i have to buy the whole tensioner assembly and they want $118. do you guys know if its the same pulley and i would be able to get one for an older model or are they different between kk and kj?

Author:	Diggerfreek [ Sun Jan 10, 2010 8:02 pm ]
Post subject:	Re: Idler/Tensioner Pulley
DirtyKK wrote: mine is going out too. dealerships says i cant get just the smooth idler pulley and i have to buy the whole tensioner assembly and they want $118. do you guys know if its the same pulley and i would be able to get one for an older model or are they different between kk and kj? It should be 53030958AE

Author:	Fulltimer [ Sun Jan 10, 2010 8:59 pm ]
Post subject:	Re: Idler/Tensioner Pulley
I paid $24.00 for the pulley. The computer at Autozone had the wrong part listed. The first one they gave me was almost twice as large as the broken one. He went back and looked for himself and hit it right away. It was a Dayco and part #89017. I don't remember exactly when I replaced it. But it was within a year. The back of the box says: "Be Sure The Engine Is Shut Off" Terry

Author:	DirtyKK [ Sun Jan 10, 2010 9:01 pm ]
Post subject:	Re: Idler/Tensioner Pulley
thanks for the part number

LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/

Idler/Tensioner Pulley http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=49119	Page 1 of 1

Author:	pssbarry [ Sun Jan 10, 2010 9:08 pm ]
Post subject:	Re: Idler/Tensioner Pulley
I ordered the entire tensioner assembly from Amazon on Friday and it's going to be delivered tommorow. The price has gone up, I only paid $45. Terry thanks for passing along the info off of the box. I was going to leave my engine running to make it more challenging. http://www.amazon.com/Goodyear-49246-Te ... 769&sr=8-1

Author:	FreedomKJ [ Mon Jan 11, 2010 1:38 am ]
Post subject:	Re: Idler/Tensioner Pulley
What are you guys doing to kill your pulleys? At 99k miles and at least two dozen times submerging the engine just short of the air intake I've yet to have a pulley go bad.

Author:	tommudd [ Mon Jan 11, 2010 2:17 am ]
Post subject:	Re: Idler/Tensioner Pulley
You should really replace the whole tensioner anyways. It could be going bad which may put more tension on the belt and cause the bearings to go out in the pulleys. Just something to think about. I replaced mine at about 85.000 I think it was

Author:	Fulltimer [ Mon Jan 11, 2010 9:01 am ]
Post subject:	Re: Idler/Tensioner Pulley
tommudd wrote: You should really replace the whole tensioner anyways. It could be going bad which may put more tension on the belt and cause the bearings to go out in the pulleys. Just something to think about. I replaced mine at about 85.000 I think it was Maybe that is why I have replaced both pulleys with the 1 being replaced twice. The next time it happens, if it happens somewhere other than an interstate or on trails, maybe I'll replace the whole thing! Terry

Author:	Budke [ Mon Jan 11, 2010 9:04 am ]
Post subject:	Re: Idler/Tensioner Pulley
Terry, just buy the whole thing and keep it in the back for safe keeping. Just incase it does go out on the trail again. lol

Author:	tommudd [ Mon Jan 11, 2010 11:14 am ]
Post subject:	Re: Idler/Tensioner Pulley
I carry a spare one in my box of spare goodies all of the time, never know when I may need one or someone else!

Author:	Budke [ Mon Jan 11, 2010 11:44 am ]
Post subject:	Re: Idler/Tensioner Pulley
tommudd wrote: I carry a spare one in my box of spare goodies all of the time, never know when I may need one or someone else! Do you tow that "box" of spare goodies behind your KJ everywhere you go? Must be killin the mileage!!

Author:	tommudd [ Mon Jan 11, 2010 1:00 pm ]
Post subject:	Re: Idler/Tensioner Pulley
Budke wrote: tommudd wrote: I carry a spare one in my box of spare goodies all of the time, never know when I may need one or someone else! Do you tow that "box" of spare goodies behind your KJ everywhere you go? Must be killin the mileage!! OK so maybe I carry a few too many extra items but always prepared

Author:	DirtyKK [ Mon Jan 11, 2010 9:27 pm ]
Post subject:	Re: Idler/Tensioner Pulley
tommudd wrote: You should really replace the whole tensioner anyways. It could be going bad which may put more tension on the belt and cause the bearings to go out in the pulleys. Just something to think about. I replaced mine at about 85.000 I think it was well i didnt see this til already installing the new pulley but you make a valid point. im just here verifying that dayco 89017 part number is correct. i had him pull the part number their database had and also the 89017, sure enough the system was wrong.

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/

Author:	KJ 119 [ Tue Jan 12, 2010 2:17 pm ]
Post subject:	Re: Idler/Tensioner Pulley
Fulltimer wrote: This time Bub wasn't there to help me either! Terry I'm just a phone call away. And about 600 miles Hey don't you wish you could just fold me up and stash me in your tool box,and pull me out whenever you need me? And not just when your glaucoma's acting up!!!

Author:	Budke [ Tue Jan 12, 2010 2:50 pm ]
Post subject:	Re: Idler/Tensioner Pulley
KJ 119 wrote: And not just when your glaucoma's acting up!!!

Author:	Fulltimer [ Tue Jan 12, 2010 8:00 pm ]
Post subject:	Re: Idler/Tensioner Pulley
I can feel my eyes acting up now! Terry http://www.marijuana-picture.com/galler ... e_here.htm

Author:	Budke [ Tue Jan 12, 2010 10:57 pm ]
Post subject:	Re: Idler/Tensioner Pulley
Fulltimer wrote: I can feel my eyes acting up now! Terry http://www.marijuana-picture.com/galler ... e_here.htm