| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Turning Powerslot Rotors? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=49334 |
Page 1 of 1 |
| Author: | MojaveKJ [ Fri Jan 15, 2010 3:11 pm ] |
| Post subject: | Turning Powerslot Rotors? |
Can Powerslot rotors be turned, machined, re-surfaced? BTW, which is the correct term anyway, I've heard all of them used for this process. Thanks, Tony |
|
| Author: | tjkj2002 [ Fri Jan 15, 2010 9:32 pm ] |
| Post subject: | Re: Turning Powerslot Rotors? |
You are not supposed to turn any slotted or drilled/slotted rotors.Some cheap idiots found the only way to turn them is on a flywheel resurface machine only and most place that machine flywheels will not do them.If there the cryo frozen ones you must buy new ones. |
|
| Author: | MojaveKJ [ Fri Jan 15, 2010 9:47 pm ] |
| Post subject: | Re: Turning Powerslot Rotors? |
That's what I figured from what I remember of how the machine works (basically a lathe?). The rotors are not scored or damaged, I just like to have a fresh-cut surface to mate to the new pads whenever possible. Thanks tjkj2002 for the good word... BTW, your KJ looks awesome! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|