It is currently Sat Oct 20, 2018 4:26 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 18 posts ] 
Author Message
 Post subject: Where to buy front cv axle?
PostPosted: Tue Sep 22, 2015 11:37 pm 
Offline
LOST Member

Joined: Wed Nov 08, 2006 11:32 pm
Posts: 313
Location: saint diego, ca
I went to Napa to get remanufactured front cv axles for my 2005 2.8l and the company that supplies them says the do not make them anymore??. Anyone know of another source for remanufactured for front cv axles? Thanks.

_________________
2005 Liberty CRD, GDE Tune, 245/75R16 AT2, OME CRD Springs front, OME HD rear, Airlift air bags


Top
 Profile  
 
 Post subject: Re: Where to buy front cv axle?
PostPosted: Tue Sep 22, 2015 11:45 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27762
Location: Central Ohio/ Tanzania
Really, just got one not too long ago from there, had it in stock

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 Goodyears/ 4.10's etc, 04 Kilimanjaro Edition loaded


Top
 Profile  
 
 Post subject: Re: Where to buy front cv axle?
PostPosted: Wed Sep 23, 2015 12:06 am 
Offline
LOST Addict

Joined: Thu Jul 16, 2009 11:34 am
Posts: 1300
I just got one today.....

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.


Top
 Profile  
 
 Post subject: Re: Where to buy front cv axle?
PostPosted: Wed Sep 23, 2015 12:07 am 
Offline
LOST Member

Joined: Wed Nov 08, 2006 11:32 pm
Posts: 313
Location: saint diego, ca
Not going to lie, I think it is BS as well but that is what they told me, so don't have another choice unfortunately. I even strenuously objected but to no avail.....

_________________
2005 Liberty CRD, GDE Tune, 245/75R16 AT2, OME CRD Springs front, OME HD rear, Airlift air bags


Top
 Profile  
 
 Post subject: Re: Where to buy front cv axle?
PostPosted: Wed Sep 23, 2015 9:26 pm 
Offline
LOST Member

Joined: Wed Nov 08, 2006 11:32 pm
Posts: 313
Location: saint diego, ca
So I tried to order it through NAPA.com. Went through but then got an email today saying it was canceled because they don't carry them/discontinued. Also said try local store for supply that may still be in the system. So back to square one, any suggestions for alternate sources for front cv axles?

_________________
2005 Liberty CRD, GDE Tune, 245/75R16 AT2, OME CRD Springs front, OME HD rear, Airlift air bags


Top
 Profile  
 
 Post subject: Re: Where to buy front cv axle?
PostPosted: Thu Sep 24, 2015 2:05 pm 
Offline
LOST Addict

Joined: Fri Jun 22, 2007 11:43 am
Posts: 4350
Location: Green Cove Springs FL
You could try ordering through rockauto.com

_________________
Bought my '05 CRD on June 2nd '07, used with 29,000 miles.
intake elbow and EGR delete. 5 volt bosch glow plugs
Yeti stage 2 ECU tune. Straight pipe exhaust. DIY intercooler hoses
Provent and modified factory 180F thermostat
Replaced cylinder head (cracked) at 160,000 miles + ARP studs
2.5 inch lift, JBA upper arms, 235-85-16 tires.
Still love it.


Top
 Profile  
 
 Post subject: Re: Where to buy front cv axle?
PostPosted: Thu Sep 24, 2015 3:44 pm 
Offline
LOST Addict

Joined: Thu Jul 16, 2009 11:34 am
Posts: 1300
flash7210 wrote:
You could try ordering through rockauto.com

Just be aware, if it has a core charge, you are responsible for the return shipping.

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.


Top
 Profile  
 
 Post subject: Re: Where to buy front cv axle?
PostPosted: Sat Sep 26, 2015 11:01 pm 
Offline
LOST Member

Joined: Wed Nov 08, 2006 11:32 pm
Posts: 313
Location: saint diego, ca
So I Think I figured out issue. Cardone (I believe) does the remanufactured CVs for NAPA. They are making them for 3.7 but not CRD (everysite shows them discontinued). So looking like my choices are either remanufactured by USA industries or new from AutoZone (Duralast gold). Does anyone have experience with either of these? I found some reviews on usa industries, about 50/50, some said their remanufactured CVs had shorter shafts (didn't say what vehicles) some had no issues. Read all the threads about new ones having shorter shafts issues, etc. so I will take any advice I can get.

_________________
2005 Liberty CRD, GDE Tune, 245/75R16 AT2, OME CRD Springs front, OME HD rear, Airlift air bags


Top
 Profile  
 
 Post subject: Re: Where to buy front cv axle?
PostPosted: Sat Sep 26, 2015 11:48 pm 
Offline
LOST Addict

Joined: Thu Jul 16, 2009 11:34 am
Posts: 1300
So I had (I didnt buy it) a new Oreily shaft. And it didnt last long. Less than 5k miles. Literally blew apart. Im sure it was too long becuase it was wearing on the shaft itself. Took it up to napa and got a reman replacement. They said the place that does the rebuilding will spec it out and if its not right.....trash

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.


Top
 Profile  
 
 Post subject: Re: Where to buy front cv axle?
PostPosted: Sun Sep 27, 2015 2:47 pm 
Offline
LOST Addict
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 4124
Location: Central GA
Advance Auto Parts lists them:
Both are less than $80 apiece
CV Axle Assembly; Front Right; 4WD, Part No. NCV82014
CV Axle Assembly; Front Left; 4WD, Part No. NCV82013
100% New Axle, No Core Exchange, and Limited Lifetime Warranty
[url][/url]
Detroit Axle lists them:
$65 apiece
http://detroitaxle.com/?s=Part%20Finder&pfs=true&pf_nonce=762aeb27be&vy=2005&vmk=22&vm=376&pt=1267

hope this helps...

_________________
05 Jeep Liberty CRD Limited :JEEPIN:
Blk Brush Guard/Hella's/LED's
Ironman Springs/Bilstein's
Yeti Stg4 MaxTune
Weeks ElbowKit/BatteryTray
NO FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pump
2mic.Sec.Fuel Filter
Flowmaster/NOcat
V6 Airbox
GM11 blade fan/NAPA HDclutch
Ironrock Trilink
98 Dodge Cummins, 5"exh. Viair, Huge K&N


Top
 Profile  
 
 Post subject: Re: Where to buy front cv axle?
PostPosted: Sat Oct 03, 2015 3:06 pm 
Offline
LOST Member

Joined: Wed Nov 08, 2006 11:32 pm
Posts: 313
Location: saint diego, ca
The Detroit axle listing was very helpful, thank you.

So I talked to Detroit Axle. They show 3.7l, 2.4l, and 2.8l as being all the same CV axle, (although he did note there may be a difference between 2.4l and 3.7l). From what I have read that is not the case and the CRD has different shaft lengths. I have also seen the 2.8l and 2.4l being listed as the same on some websites for new ones which appears to be correct. I just wanted to see if anybody knew something different before I agree to buying 2.4l CV axles.

Comparing MOPAR part numbers:
2.8L
Right - 52111780AB
Left - 52111781AB

2.4L
Right - 52111780AB
Left - 52111781AB

3.7L
Right - 52111778AB
Left - 52111779AB

_________________
2005 Liberty CRD, GDE Tune, 245/75R16 AT2, OME CRD Springs front, OME HD rear, Airlift air bags


Top
 Profile  
 
 Post subject: Re: Where to buy front cv axle?
PostPosted: Mon Oct 26, 2015 11:47 am 
Offline
LOST Addict
User avatar

Joined: Thu Jul 23, 2009 5:47 pm
Posts: 1890
Location: York,PA
That will suck if there are no Good places to get parts like this soon.. maybe IDparts.com would stock them for us if that happens but I did fine this on Auto Zones web site.

http://www.autozone.com/drivetrain/cv-a ... rbo-diesel

_________________
2006 Liberty CRD Limited Deep Beryl Green Metallic Clear coat, Fumoto valve, MH ProVent (removed), GDE Eco tune,
OME 790/948 springs, OME struts, OME N132L shocks, Jeepin by Al A-arms, Hercules Terra Trac AT2 245/75R16
Weeks Stage 1 EGR delete, 5 volt steel glow plugs


Top
 Profile  
 
 Post subject: Re: Where to buy front cv axle?
PostPosted: Thu Nov 30, 2017 6:43 pm 
Offline
LOST Addict
User avatar

Joined: Sat Nov 23, 2013 8:57 pm
Posts: 2119
Location: Boise, Idaho
This is a good thread, any reports back on the durability of different make CV axles that are still available?

_________________
05 CRD: H.D.S2 stat, Ironrock trilink, Integrated air OX rear,truetrac front, Suncoast,OME 2.5, JBA UCA,rock rails, Moabs&245/75 Duratracs, GDE tunes ,FFD fan,ARP's, 2 micron fuel, new head,rockers, cams,sasquatch battery tray & grid heater, welded EGR port & trans drain, muffler delete,tensioner relocated
Mech fan VH & AC delete


Top
 Profile  
 
 Post subject: Re: Where to buy front cv axle?
PostPosted: Thu Nov 30, 2017 6:59 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Apr 01, 2006 9:38 pm
Posts: 13130
Location: Colorado Springs
Mountainman wrote:
This is a good thread, any reports back on the durability of different make CV axles that are still available?

The only ones that last because they are the correct length are Napa reman's.


Top
 Profile  
 
 Post subject: Re: Where to buy front cv axle?
PostPosted: Fri Dec 01, 2017 4:28 pm 
Offline
LOST Addict
User avatar

Joined: Sat Nov 23, 2013 8:57 pm
Posts: 2119
Location: Boise, Idaho
Thanks man. So, I called Napa with the part number from this thread, and since reading several threads on the subject, I looked for 4 cylinder and diesel cv's, but they only list V6 for 02-05, and as usual the Chrysler part number is useless. Any tips on finding one? I know other people said they were discontinued, hmm

_________________
05 CRD: H.D.S2 stat, Ironrock trilink, Integrated air OX rear,truetrac front, Suncoast,OME 2.5, JBA UCA,rock rails, Moabs&245/75 Duratracs, GDE tunes ,FFD fan,ARP's, 2 micron fuel, new head,rockers, cams,sasquatch battery tray & grid heater, welded EGR port & trans drain, muffler delete,tensioner relocated
Mech fan VH & AC delete


Top
 Profile  
 
 Post subject: Re: Where to buy front cv axle?
PostPosted: Fri Dec 01, 2017 4:31 pm 
Offline
LOST Addict
User avatar

Joined: Sat Nov 23, 2013 8:57 pm
Posts: 2119
Location: Boise, Idaho
http://www.pirate4x4.com/forum/jeep-non ... cs/2448465

I see ID parts and some other place online have the 52111780AB listed for about $300 shipped with core charge included in that price, ouch!

Ok, guy on pirate said Mopar only.

_________________
05 CRD: H.D.S2 stat, Ironrock trilink, Integrated air OX rear,truetrac front, Suncoast,OME 2.5, JBA UCA,rock rails, Moabs&245/75 Duratracs, GDE tunes ,FFD fan,ARP's, 2 micron fuel, new head,rockers, cams,sasquatch battery tray & grid heater, welded EGR port & trans drain, muffler delete,tensioner relocated
Mech fan VH & AC delete


Top
 Profile  
 
 Post subject: Re: Where to buy front cv axle?
PostPosted: Fri Dec 01, 2017 7:01 pm 
Offline
LOST Addict

Joined: Fri Jun 22, 2007 11:43 am
Posts: 4350
Location: Green Cove Springs FL
https://www.amazon.com/dp/B007Y5L8KK/ref=cm_sw_r_cp_api_h5DiAbC0WWGR6

Probably not the highest quality but the price is reasonable.

_________________
Bought my '05 CRD on June 2nd '07, used with 29,000 miles.
intake elbow and EGR delete. 5 volt bosch glow plugs
Yeti stage 2 ECU tune. Straight pipe exhaust. DIY intercooler hoses
Provent and modified factory 180F thermostat
Replaced cylinder head (cracked) at 160,000 miles + ARP studs
2.5 inch lift, JBA upper arms, 235-85-16 tires.
Still love it.


Top
 Profile  
 
 Post subject: Re: Where to buy front cv axle?
PostPosted: Fri Dec 01, 2017 7:15 pm 
Offline
LOST Addict
User avatar

Joined: Sat Nov 23, 2013 8:57 pm
Posts: 2119
Location: Boise, Idaho
flash7210 wrote:
https://www.amazon.com/dp/B007Y5L8KK/ref=cm_sw_r_cp_api_h5DiAbC0WWGR6

Probably not the highest quality but the price is reasonable.


Thanks flash. I decided to run used OEM one (free) since they seem to last a really long time if the intermediate shaft is greased and the o ring replaced. i have a set sitting around with 88k miles on them, and good boots. I'd like to see more reviews on those amazon ones you linked. I hear prior mention Detroit asked, but I don't see a diesel or 4 cylinder option. I should call them, but I'm in a hurry to get my jeep back together.

_________________
05 CRD: H.D.S2 stat, Ironrock trilink, Integrated air OX rear,truetrac front, Suncoast,OME 2.5, JBA UCA,rock rails, Moabs&245/75 Duratracs, GDE tunes ,FFD fan,ARP's, 2 micron fuel, new head,rockers, cams,sasquatch battery tray & grid heater, welded EGR port & trans drain, muffler delete,tensioner relocated
Mech fan VH & AC delete


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 18 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com