| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Rivit size http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=57142 |
Page 1 of 1 |
| Author: | Vranes17 [ Fri Nov 26, 2010 4:55 pm ] |
| Post subject: | Rivit size |
Need to rivit my fenders back on and don't wanna use the plastic ones what size and width rivits do I use? |
|
| Author: | Vranes17 [ Tue Nov 30, 2010 8:16 pm ] |
| Post subject: | Re: Rivit size |
alllrighty then, anyone have the part number for the 7/16th plastic push rivits? |
|
| Author: | MikeD0106 [ Tue Nov 30, 2010 11:30 pm ] |
| Post subject: | Re: Rivit size |
I think this question came up in the past & I remember there was a part # there. I think it was in the General Discussion forum & it definitely was a while ago. I will try to look for it when I get home but no promises. Sent using Tapatalk |
|
| Author: | LI_KJ [ Wed Dec 01, 2010 2:03 pm ] |
| Post subject: | Re: Rivit size |
http://auveco.com/download/pdf/471.pdf Check this page. I don't know which model you need but it's most likely one of these. For a WJ but some info could be useful. http://www.wjjeeps.com/grilles/grillesrem.htm#RIVETSET Jeff |
|
| Author: | scoobysnax789 [ Wed Dec 08, 2010 2:00 am ] |
| Post subject: | Re: Rivit size |
I picked some up from the dealer for my right front fender flare – BUT – I was told by the dealer that I need a special rivit gun as a normal one would crack the plastic rivits. Does anyone know if there is any truth to that? Andrew – I’ll check to see if there is a part tag on them but I'm pretty sure I just picked them up individually and put them in a brown bag. |
|
| Author: | ridenby [ Wed Dec 08, 2010 5:11 am ] |
| Post subject: | Re: Rivit size |
Vranes17 wrote: alllrighty then, anyone have the part number for the 7/16th plastic push rivits? For push rivets go to Lowes they have several styles of push rivets. |
|
| Author: | Bobzkj [ Wed Dec 08, 2010 12:47 pm ] |
| Post subject: | Re: Rivit size |
http://www.sjdiscounttools.com/ Yes you need a plastic rivit install tool as they require a longer stroke to set the plastic rivit and a larger barrel to accommodate the diameter of the rivit shank. 20 bucks from the above. I see you already got hosed by the dealer for the rivits. I will see what the part number is from autobody supply on the rivits I have. They work fine, slightly smaller head although I think they had both sizes. |
|
| Author: | JeepinJarhead03 [ Wed Dec 08, 2010 5:35 pm ] |
| Post subject: | Re: Rivit size |
Both lowe's and HD have the Hilman? push rivets, as many times as I've had my flares on and off, I've only had to replace 2 of them |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|