| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Transmission fault code... http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=57360 |
Page 1 of 1 |
| Author: | CaKJFreedom [ Mon Dec 06, 2010 6:52 pm ] |
| Post subject: | Transmission fault code... |
Hi guys, KJ was revving high and the engine light came on. I got code P0700 - Transmission Control System Malfunction. Which is "EATX or Aisin transmission controller has an active fault and has requested MIL illumination via a bus message to the SBEC/JTEC (MIL, DTC, and freeze-frame data reset following transmission fault clear" What the heck is that in English? Thanks, |
|
| Author: | daspes [ Mon Dec 06, 2010 8:56 pm ] |
| Post subject: | Re: Transmission fault code... |
Nanette, The P0700 is a generic MIL code for "something" that is wrong with the tranny. Could be a simple as low ATF, or a lot more pricey. Unfortunately, you need a code reader to pull the real DTC from the computer. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|