Sometimes, even the simplest things are hard... I'm having trouble removing the windshield wiper arms on my '06 Liberty. Even after removing the hold-on nut, and using a puller, the arms won't release from the shaft. Has anybody else experienced this? What did you do to remover the arms?

Thanx,

Steve

After the nut is removed simply raise the wiper arm in the "up" position,grab it at the bend and push down and yank back up with some force a few times and normally will break the arm free.Always worked for me.

I have the exact same problem on my '05. I finally gave up trying to remove them in fear of breaking something..

_________________
It only takes one man to place a trail..

I had to use a puller for mine the first time I pulled the whole arm off. I used a battery terminal puller, just like a gear puller only in miniature.

On my Durango I broke the windshield changing wiper blades on it.

_________________
05 KJ Limited 4x4 in Light Khaki: Detours USA Backbone, Warn M8000, Huskyliners, RockLizard Super Skink sliders, OME/Bilstein Lift, JBA UCA's, 245/70/17 Nitto Terra Grapplers
07 LR3 SE V8
1996 XJ Country
2015 KL Limited