| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| need help with mopar skids http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=58018 |
Page 1 of 1 |
| Author: | steve03sport [ Wed Jan 05, 2011 2:29 pm ] |
| Post subject: | need help with mopar skids |
can anyone give me a link or some pics of the 3 mopar skids mounted on an 03 kj? going to try to put these on tommorow and would love a link with a how to. and also a link to take off front bumper to put on mopar tow hooks. please help |
|
| Author: | LetFreedomRing [ Wed Jan 05, 2011 2:57 pm ] |
| Post subject: | Re: need help with mopar skids |
steve03sport wrote: can anyone give me a link or some pics of the 3 mopar skids mounted on an 03 kj? going to try to put these on tommorow and would love a link with a how to. and also a link to take off front bumper to put on mopar tow hooks. please help Can't help you with the skids, but you can put the tow hooks on without removing the bumper. A slight pain but possible.  Check this out: http://www.jeepkj.com/forum/showthread.php?t=29219&highlight=renegade+hooks |
|
| Author: | tommudd [ Wed Jan 05, 2011 3:48 pm ] |
| Post subject: | Re: need help with mopar skids |
Skids start at the rear and work forward, you want them to overlao, well the front skid over the tranny.If you're using the nutzerts then the holes are right there when you hold the skid up. My tranny skid I drilled and bolted it on. Pretty simple process |
|
| Author: | Pippobug [ Thu Jan 06, 2011 5:48 am ] |
| Post subject: | Re: need help with mopar skids |
steve03sport wrote: can anyone give me a link or some pics of the 3 mopar skids mounted on an 03 kj? going to try to put these on tommorow and would love a link with a how to. and also a link to take off front bumper to put on mopar tow hooks. please help Hi Steve, You can have a look at this topic I posted earlier : viewtopic.php?f=3&t=54621 For what concerns the middle Skid I had to modify it in the end to make it more secure.  and drill a couple more holes to secure it. For what concers fron Mopar hooks, they are just fidly to put on, easier it you take the front bumper off, but you can put them one without taking it off. Fil. |
|
| Author: | JeepinJarhead03 [ Thu Jan 06, 2011 6:35 am ] |
| Post subject: | Re: need help with mopar skids |
depending on the exhaust system type on your vehicle, you may find it necessary to pound flat the section in the top right of pip's photo of his modification to the tranny skid |
|
| Author: | Pippobug [ Thu Jan 06, 2011 6:59 am ] |
| Post subject: | Re: need help with mopar skids |
JeepinJarhead03 wrote: depending on the exhaust system type on your vehicle, you may find it necessary to pound flat the section in the top right of pip's photo of his modification to the tranny skid The Skid is for a '05/07 model and it was already like that, with the top part pounded down from Mopar. Fil. |
|
| Author: | Zinger [ Fri Jan 07, 2011 12:39 am ] |
| Post subject: | Re: need help with mopar skids |
I just installed my tow hooks last weekend, and had no problems even with the front bumper still on. As for the skids, install rear to front like tomm said. If you're using nutzerts, don't overtorque the bolts. On the tranny skid, I drilled through the crossmember and bolted as well. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|