| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| KJ 4x4 specs http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=5874 |
Page 1 of 1 |
| Author: | wrangler55 [ Wed Feb 15, 2006 1:12 pm ] |
| Post subject: | KJ 4x4 specs |
I hear and read a lot about Dana this and Dana that, new process ,etc.What exactly does the KJ have? Are all KJ's alike . I have a Liberty 4x4 Sport I bought used. How do I know what I have? Help!!!!!! |
|
| Author: | uvalax236 [ Wed Feb 15, 2006 1:19 pm ] |
| Post subject: | |
The KJ has a Dana 30a front diff and Corp. 8.25 (Unless you had a 4banger 02, which had a Dana 35). |
|
| Author: | ManicMechanicJoe [ Wed Feb 15, 2006 1:47 pm ] |
| Post subject: | |
the transfer cases are all NV231 or NP242 depending on if you have command trac or selec trac Our 8.25 is a little special, it came with 29 spline axles as opposed to the 27 splines found in the XJ's |
|
| Author: | JJsTJ [ Wed Feb 15, 2006 3:08 pm ] |
| Post subject: | |
Later model XJ's also came w/ 29 spline axles. |
|
| Author: | Jeepjeepster [ Wed Feb 15, 2006 7:21 pm ] |
| Post subject: | Re: KJ 4x4 specs |
wrangler55 wrote: I hear and read a lot about Dana this and Dana that, new process ,etc.What exactly does the KJ have? Are all KJ's alike . I have a Liberty 4x4 Sport I bought used. How do I know what I have? Help!!!!!!
Libbys are cool? Anything else. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|