Just replaced rotors and pad on our 05'. 50 miles later the outboard pad, drivers side, fell out!! I've done this job on many jeeps lots of times.. I'm not home now to look at it.. What did I do wrong????? I'm really " lost " on this one as it has never happened to me before. Thanks for all advise..

_________________
04 TJ Rubicon; 3" lift; 255/85/16's BFG muds; skids & armor; Warrior top rack; Warrior back rack; K&N w/Rockit Air Tube; HD u-joints ; Cobra CB; home built 2000 gvw off road trailer with matching moabs and rubber

05 KJ CRD; Bone stock with K&N filter

Did you replace the stainless steel clips that the brake pads ride on. I had a clip break and fall out. didn't loose a pad, but it was loose.

I recommend you replace all the hardware, about $7.50 for the kit for the front brakes.

_________________
2005 CRD "Ol' Blue"
Red Ryder carbine-action, two hundred shot range model air rifle with a compass in the stock and this thing which tells time.
My build page- RL Komodo Rear and TJM Front Bumper, armored, lifted, JBA Steel D30, 4.10s and ARB air lockers.