despite the mileage replace everything with aftermarket shocks and springs. the ride quality alone is worth the money
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 2006 jeep liberty factory ride height http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=60327 |
Page 1 of 1 |
| Author: | vincennescrd [ Sat Apr 23, 2011 2:02 pm ] |
| Post subject: | 2006 jeep liberty factory ride height |
Can anyone tell me what the factory ride height Is on my 06 Crd. Previous owner said she replaced front suspension at 80000 miles. I'm looking at lifting but need to know the ride height to see if I need new coils thanks |
|
| Author: | irollgen4s [ Sat Apr 23, 2011 2:26 pm ] |
| Post subject: | Re: 2006 jeep liberty factory ride height |
despite the mileage replace everything with aftermarket shocks and springs. the ride quality alone is worth the money
|
|
| Author: | vincennescrd [ Sat Apr 23, 2011 2:43 pm ] |
| Post subject: | Re: 2006 jeep liberty factory ride height |
I probably will but out of curiosity do you know what the height is by chance |
|
| Author: | HoosierJeeper [ Sat Apr 23, 2011 3:02 pm ] |
| Post subject: | Re: 2006 jeep liberty factory ride height |
From the hub to bottom of fender flare should be 19" for front and 19.5" for rear. |
|
| Author: | vincennescrd [ Sat Apr 23, 2011 8:09 pm ] |
| Post subject: | Re: 2006 jeep liberty factory ride height |
Thank you very much |
|
| Author: | HoosierJeeper [ Sun Apr 24, 2011 8:56 am ] |
| Post subject: | Re: 2006 jeep liberty factory ride height |
No prob...so what are the measurements? |
|
| Author: | vincennescrd [ Mon Apr 25, 2011 7:24 am ] |
| Post subject: | Re: 2006 jeep liberty factory ride height |
Haven't had a chance to measure but I'll post when I find out. By the way I also joined the geo Suzuki world. I got a geo tracker beater |
|
| Author: | vincennescrd [ Tue Apr 26, 2011 12:03 pm ] |
| Post subject: | Re: 2006 jeep liberty factory ride height |
It has settled 1 inch all the way around. Thanks for the help guys. Who all sells coils factory and lift wise |
|
| Author: | j-rod [ Tue Apr 26, 2011 2:12 pm ] |
| Post subject: | Re: 2006 jeep liberty factory ride height |
HoosierJeeper wrote: From the hub to bottom of fender flare should be 19" for front and 19.5" for rear. just measured my wifes KJ. 100k miles. front - 18 7/8" rear - 19.5" 
|
|
| Author: | liquidxit2 [ Tue Apr 26, 2011 3:03 pm ] |
| Post subject: | Re: 2006 jeep liberty factory ride height |
My 2006 gasser is at ~18in for each and Im at ~52k miles. Thank God the talon actually sold and Ill have my OME ordered by the end of the week hopefully. I would look at OME or frankenlift kits as they seem to last the longest and have the best ride. |
|
| Author: | Xodius [ Tue Apr 26, 2011 4:55 pm ] |
| Post subject: | 2006 jeep liberty factory ride height |
Get the OME lift HD and you will love it. I have it on mine and love it today as much if not more than when I put it on some 55-60k miles ago lol. Current ride height is 22 front and 21 3/4 rear. Just put boilers top plate and clevis lift on last night. Was at 23 front but I hit a few hard dips on my way in and made it all settle back down a bit.  . Oh and those measurements are with a arb front bumper and winch and a lot of steel out back. |
|
| Author: | ricci2424 [ Tue Feb 05, 2013 9:53 am ] |
| Post subject: | Re: 2006 jeep liberty factory ride height |
I'm at 18 front and 18.5 rear on my 2005 gasser with 85k on her. Should I replace all around? |
|
| Author: | kingjeep [ Tue Feb 05, 2013 10:12 am ] |
| Post subject: | Re: 2006 jeep liberty factory ride height |
tire size brand |
|
| Author: | tommudd [ Tue Feb 05, 2013 10:12 am ] |
| Post subject: | Re: 2006 jeep liberty factory ride height |
ricci2424 If you want a better ride, better handling etc then yes |
|
| Author: | tommudd [ Tue Feb 05, 2013 10:13 am ] |
| Post subject: | Re: 2006 jeep liberty factory ride height |
kingjeep wrote: tire size brand ????? 
|
|
| Author: | ricci2424 [ Tue Feb 05, 2013 10:23 am ] |
| Post subject: | Re: 2006 jeep liberty factory ride height |
Mine are 225/75/16 Goodyear wrangler st. They have a pretty good amount of tread left so I'm not gunna replace them right away. I also wanna put an OME lift on. Just wanted to know if my suspension should be replaced with those measurements I posted. |
|
| Author: | JeepMorrison [ Tue Feb 05, 2013 11:29 am ] |
| Post subject: | Re: 2006 jeep liberty factory ride height |
My DD is a 06 and currently sitting at 19 all way around. Next week or so im putting ironman on it. Sent from my Home Phone using Tapatalk 2 |
|
| Author: | HedsIc [ Wed Feb 06, 2013 9:55 pm ] |
| Post subject: | Re: 2006 jeep liberty factory ride height |
My 2006 gasser from the pinch weld was just around 13.5". All stock. |
|
| Author: | tommudd [ Wed Feb 06, 2013 10:14 pm ] |
| Post subject: | Re: 2006 jeep liberty factory ride height |
HedsIc wrote: My 2006 gasser from the pinch weld was just around 13.5". All stock. Measure from middle of the wheel to bottom of the flare that way no matter what size tires etc you have on or anyone else it'll be close |
|
| Author: | HedsIc [ Wed Feb 06, 2013 10:21 pm ] |
| Post subject: | Re: 2006 jeep liberty factory ride height |
Ok, 18.5" front 19" rear. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|