Hi everyone.

Recently I bought a RB3 Navigation Unit (used from a Chrysler PT Cruiser owner).
I found some installation pictures for RB1 unit on GC but not for the Liberty. Anybody knows where is the Nav Antenna should be installed?

Thanks a lot,

_________________
by nisiotis...
05 Jeep Cherokee (KJ) 2.4L Dark Khahi - no mods.

the antenna fits over the speedo cluster, towards the front of the windshield under the dash pad. You need to remove the top of dash.

Al

_________________
One Ruby, One Grand Cherokee, One YJ, One disassembled CJ, one Chevy Mason dump, one hotrod IH Pick-up, couple of antique tractors.
Former owner of a 5.5 inch lifted KJ

Curious about your location because I have read that the RB3 was not for the North American market

Bob

by nisiotis...
05 Jeep Cherokee (KJ) 2.4L Dark Khahi

_________________
2016 JKU RUBICON

other mods coming soon...

The RB3 is the European version of the RB4. You may have a problem with the radio frequencies with the RB3 in the US. They would also use different data disks.

Here's the antenna installation: http://www.jeepkj.com/forums/viewtopic.php?t=642

Here's the radio part (all the radios use the same procedure):
http://www.jeepkj.com/forums/viewtopic.php?t=317

Here's some more info on the RB3 and RB4:
http://www.wjjeeps.com/nav_rb4.htm[/u]

_________________
'04 Liberty 4x2 Sport 5 speed. Added Trac Loc, front skid, Renegade wheels, Draw-Tite hitch, EVIC, RB1 nav. radio, courtesy lights, vent visors.

Thanks everybody for your answers...

Gentleman i am from Greece. RB3 is the European version of RB4 Navigation unit from Harmon International.

Thanks again...

_________________
by nisiotis...
05 Jeep Cherokee (KJ) 2.4L Dark Khahi - no mods.