LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

I swear I searched this...
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=60646
Page 1 of 1

Author:  MNKK [ Thu May 12, 2011 8:46 am ]
Post subject:  I swear I searched this...

I know this has been asked before, but when I hold the odo/trip reset in, and turn the key to accessory... What is the crazy jibrish that they display starts going on about? Do those numbers mean anything significant to me?


PS: How has everyone been?

Author:  MNKK [ Thu May 12, 2011 9:08 am ]
Post subject:  Re: I swear I searched this...

To be more specific, this is what comes up...

S 31.3
.175 -.7
C 64.2
L 60.5
cF.9

In that order...

Author:  JL Rockies [ Thu May 12, 2011 10:06 am ]
Post subject:  Re: I swear I searched this...

I don't know what that means or why it's coming up on our ODO but.... you bought a Zune.... lolz.

Author:  MNKK [ Thu May 12, 2011 10:13 am ]
Post subject:  Re: I swear I searched this...

For $50 a looooooooooooonnnnnnnngggggg time ago.

What's wrong with Zune? It works well.

Author:  Billwill [ Thu May 12, 2011 2:33 pm ]
Post subject:  Re: I swear I searched this...

Well what you are doing is the procedure to test that the gauges move and all the lights on the dash work. I saw somewhere that part of the code displayed in the Odometer has to do with the Firmware levels of some of the various modules on the CAN bus. :?

Edit to add: I have only done this procedure while turning the ignition to Ignition...not Acc. I shall try the Acc position on my Jeep tomorrow but I still think it is part of the Firmware levels or VIN or suchlike.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/