Just an FYI...The greasable lower ball joints that NAPA carries for the KJ do not fit! Well, they probably fit, but you wouldn't be able to grease them without taking out your CV's since the zerk fitting is on the top of the BJ. They also looked chintzy compared to the Moogs, so I probably wouldn't try their non-greasable ones either...

_________________
"BERT" 2003 3.7L Sport Gasser with the 5-speed stick
Frankenlifted (plus 1 extra rear iso. and a 3 nut clevis), Al's gen 4.5 UCA's, Full Mopar Skids, Kurt Hitch, Soft 8's, BFG AT's 245 75 16, Rock Lizard Front Bumper, fence top-rail crossbars (unbent!), some stuff inside...

JeepinbyAl carries the right ones
http://jeepinbyal.com/prod-Moog_Ball_Joint-323.aspx

_________________
2005 CRD
stuff
Skeptic quod gratis asseritur, gratis negatur

I ordered some from O Reillys

_________________
"BERT" 2003 3.7L Sport Gasser with the 5-speed stick
Frankenlifted (plus 1 extra rear iso. and a 3 nut clevis), Al's gen 4.5 UCA's, Full Mopar Skids, Kurt Hitch, Soft 8's, BFG AT's 245 75 16, Rock Lizard Front Bumper, fence top-rail crossbars (unbent!), some stuff inside...