| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| When welding on the body Question http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=6091 |
Page 1 of 1 |
| Author: | AZ_Overdrive [ Thu Feb 23, 2006 9:36 am ] |
| Post subject: | When welding on the body Question |
Quick question... If I am MIG welding on the vehicle body am I ok to just disconnect the battery? Don't want to fry anything electronic. This is actually for my TJ, I am fabbing a rear bumper and need to tack the bumper to custom mounts I am making while on the vehicle for alignment. Thanks! |
|
| Author: | libby [ Thu Feb 23, 2006 7:03 pm ] |
| Post subject: | |
just disconnect the negative battery terminal and you will be fine. I've done it many times myself. |
|
| Author: | AZ_Overdrive [ Fri Feb 24, 2006 8:59 am ] |
| Post subject: | |
Great! Thanks.. |
|
| Author: | Jeepin Al [ Mon Feb 27, 2006 7:59 pm ] |
| Post subject: | Welding |
If you weld on the "frame " part next to the floor boards be careful, the main wiring harness runs througth the upper part on the channel. Al |
|
| Author: | Tokyojoe [ Mon Feb 27, 2006 9:39 pm ] |
| Post subject: | |
Wrong location for this question. Should be in the General section. This section is for people with Fab ideas. Just FYI |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|